Kontron CPS3101

2.5" SATA HDD/SSD Slot, -40 to +85°C Qualified

Manufacturer: Kontron
Kontron CPS3101

The CPS3101 is a 3U CompactPCI® Serial carrier board that provides support for one 2.5" SATA HDD or SSD (transfer rates up to 6Gb/s are supported). In addition, the CPS3101 is equipped with an onboard USB 3.0 connector enabling the connection to system-internal USB devices.

To ensure maximum signal integrity, redriver components are used for the SATA and USB interfaces.

The complete board design is optimized for best shock and vibration resistance. Moreover, it offers customers a service-friendly implementation. Status information of the carrier board and the drive assembled are shown via four LEDs on the front panel. If a drive fails, the complete carrier board can be hot-swapped during system operation.


FeaturesSerial ATA (SATA)
• One SATA connector for connecting one 2.5" SATA HDD/SSD, SATA 6Gb/s
• Transfer rates depending on HDD/SSD
• RAID level depends on CPU board

USB: One angled USB 3.0 connector, 9-pin type-A

Hot Swap Handle: If the HS handle is pressed the onboard power supplies will be shut down and the board can be safely removed from the CPCI-S.0 system environment
Connections4 LEDs at front panel
• Act (Activity): Activity of the HDD/SSD
• Loc (Locate): Locates the HDD/SSD in a RAID array
• Fail (Error): Failure Status of the HDD/SSD
• Pwr (Power): Power Status of the CPS3101


ExpansionP1 connector supporting one SATA 6Gb/s, one USB 3.0 interface and the SGPIO bus
Option to assemble the P6 for increased mechanical stability
CompactPCI® Serial Specification PICMG® CPCI-S.0 R1.0 compliant
ElectricalSupply voltage
• +12V (-25%/+10%), power consumption depending on HDD/SSD
MechanicalDimensions: conforming to CompactPCI® Serial specification for 3U boards
Hot plug functionality (depending on CPU board)
Front panel: 4HP with ejector
Conformal CoatingConformal coating on request
TemperatureTemperature range (operation):
• 0 to 60°C
• -40 to +85°C extended temperature
Temperature range (storage): -40 to +85°C
Humidity93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Weight135 g (without mezzanine card)
MTBF1,731,576 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C
Safety/CertificationCompliant to IEC60950-1, EN60950-1, UL94-V0; designed to meet: UL60950-1, CSA 22.2 No. 60950-1
EMCCompliant to EN55022 Class B, EN55024, EN61000-6-1/ -2/ -3 /-4, EN50121-3-2 (Railway); designed to meet: FCC, VCCI, BSMI
Warranty2 Years



3U/4HP carrier board for one 2.5" SATA HDD/SSD, internal USB 3.0 connector, 0 to 60C
Recab UK
Interested in this Product?

Get In Touch