Kontron CP6006-SA

6U CompactPCI Intel Xeon D SBC Server Blade

Manufacturer: Kontron
Kontron CP6006-SA
Introduction

CP6006 is a server-class CPU platform, designed and produced in Germany. CP6006 is based on the 14nm technology Intel® Xeon® D-1500 processor with 8 CPU cores (options 2–16 cores), with excellent performance-per-watt values. Its scalable power budget allows users to tailor the power dissipation to their requirements. CP6006-SA provides cooling mechanics for standard air-cooled systems.

Safe investment by virtualisation

CP6006 is well suited for advanced Multi-CPU server applications, built as virtual machines. By using virtualization, any CP6006 based platform becomes a future proof investment. The well established CompactPCI ecosystem, combined with long term availability of the XEON D-1500 processor family and 10 years Intel reliability, make it a safe choice.

For 19” Rackmount servers with higher demands

The outstanding Xeon® server capabilities can be combined with a high storage capacity of 32 GB DDR4 with ECC or on request even 64 GB, to allow for excellent virtualization support. This makes CP6006-SA and CP6006X-SA the ideal choice for servers and computing nodes when ordinary 19” Rackmount systems do not meet the required robustness and longevity.

Versatility in communication, storage, extensions

The Xeon D system on a chip (SoC) has an integrated platform controller hub (PCH), two integrated 10 Gigabit Ethernet ports and integrated I/O such as USB and Serial ATA channels. Different Serial ATA storage devices can be used with CP6006: an onboard M.2 flash device, or others such as a 2.5" HDD/SSD by using the additional onboard cable connection or one of the rear transition modules. The highly integrated CP6006-SA also features an XMC site supporting x8 PCI Express® and alternatively a PMC site for various market available extensions. Based on the Kontron rear I/O concept, existing rear I/O transition modules are fully functional on the CP6006-SA, where the CP6006X-SA provides additional 10GbE and PCI-Express on the backplane for communication between CompactPCI® slots.

PCI Express® and 10 Gigabit Ethernet via backplane PICMG2.20-based 

PCI Express® and 10 Gigabit Ethernet are enabled via a high-speed backplane connector at J4 position and the signalling according to PICMG2.20. The function is provided as an additional option beyond PICMG2.16 by the product variant CP6006X-SA. In detail: high bandwidth x8 PCI-Express® Gen3 and two lanes of 10 Gigabit Ethernet. The PICMG2.20 based products are the right choice whenever the highest data throughput and maximum bandwidth within the system are required. Further PICMG2.20 based boards are the PMC/XMC carrier CP6105X, the GPU carrier CP6108X, the GPU card CP6-GPU8860, backplanes, card cages, and a sample system CP-RAPID.

CPU

CPU SpecIntel® Xeon® Processor D-1500, integrating a PCH and a dual 10 GbE NIC.
• D-1539, 8 core, 12 MByte cache, 1.6 GHz
• D-1548, 8 core, 12 MByte cache, 2.0 GHz
• D-1559, 12 core, 18 MByte cache, 1.5 GHz, on request
Intel® Pentium® Processor D1519, integrating a PCH and a dual 10 GbE NIC, 4 core, 6 MByte cache, 1.5 GHz
ChipsetIntegrated PCH
Memory16 / 32 / 64 GByte SODIMM dual-channel DDR4 with ECC, up to 2133 MHz
per channel; 64 GByte requires 8HP extension on the bottom side
Graphics1x DSUB connector for analog monitors (front)
2x DVI/HDMI to rear I/O
Network3x 1000BASE-T Ethernet channels on RJ45 connector (front)
Two PICMG 2.16 rear I/O 1000BASE-T ports (rear)
Two 10G BASE-KR Ethernet channels to J4 (based on PICMG 2.20) (rear)
StorageSocket for optional M.2 Solid State Drive
Four ports fixed to rear I/O, one port for a standard SATA connector, one port supporting M.2 SSD flash (type 2280 or 2242 double-sided)
USB2x USB interface on USB-A host connector (front)
SerialCOM1 (RS232) routed to front panel and rear I/O
COM2 (RS232/RS422) routed to rear I/O only
Front I/O

2x USB interface on USB-A host connector
1x RS232 serial interface on RJ45 connector
3x 1000BASE-T Ethernet channels on RJ45 connector
1x DSUB connector for analog monitors

Rear I/OJ3: 2x ETH with PICMG 2.16 option, VGA, COM 1/2, 4x USB, GPIO, fan sense
J4: CP6006-SA: not assembled;
J4: CP6006X-SA ZD-plus connector: 2x 10GBASE-KR, x8 PCIe Gen 3, 2x SATA 6Gb/s
J5: 2-4x SATA, 2x DVI/HDMI, battery, fan control, additional GPIO
CommonWatchdog, software configurable, 125 msec to 256 sec, generates IRQ or hardware reset. Hardware monitor for thermal control, fan speed, and all onboard voltages RTC battery backup
IPMI 1.5-compliant for IPMI based management and CompactPCI® System Management PICMG 2.9 R1.0
BIOSAMI uEFI (BIOS) with POST codes, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation, LAN boot, Quick boot, Board identification data accessible via EEPROM
PlatformKontron Security Solution (on request), Trusted Platform Module (TPM) 2.0

GENERAL

ExpansionPICMG 2.0 Rev. 3.0 compatible, 64-bit / 66 MHz, Universal V(I/O) 5 V or 3.3 V signalling, Operating in system slot as system master and in the peripheral slot in PCI passive mode (no communication to CompactPCI® bus)
One 32-bit / 66 MHz PMC slot, Pn1-Pn2, 3.3 volt V (I/O). Alternatively, one XMC slot via P15, supporting XMC.3 x8 PCI Express®

Compliance:
CompactPCI® Core Specification PICMG 2.0 Rev. 3.0
CompactPCI® Hot Swap Specification PICMG 2.1 R2.0
CompactPCI® System Management PICMG 2.9 R1.0, IPMI 1.5
CompactPCI® Packet Switching Backplane PICMG 2.16 R1.0
ElectricalTypical 55 watts or 65 watts, depending on CPU type
Mechanical3U 4HP/8HP/12HP CompactPCI, 100 x 160 mm
SoftwareWindows® 10 (64bit), Windows® Server 2012, 2008-R2, Linux®, VxWorks® 7.x
VMware ESXi
Temperature0C to 60 °C (D-1539), 0 °C to 55 °C (D-1548), -40 °C to 70 °C (D1519)
Passive module heat sink requires forced airflow cooling
Humidity93 % RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
WeightApprox. 800 gr
Safety/CertificationDesigned to meet or exceed:
Safety: UL 60950-1, CSA 22.2 No 60950, EN 60950-1, IEC 60950-1
MTBF170,490 hrs acc. to MIL-HDBK-217 FN2 Ground Benign 30°
EMCEN 55022 Class B, EN 55024
Warranty2 Years
RoHSCompliant

 

 

ORDERING DETAILS

BoardCP6006-SA-1.5Q-16-4R-T-E1X
With 4 core Intel® Pentium® D1519, 16 GByte DDR4, backplane connector J4 not assembled, standard air-cooled, extended temperature range -40 °C to +70 °C

CP6006-SA-1.6O-16-4R-T
With 8 core Intel® Xeon® D-1539, 16 GByte DDR4, backplane connector J4 not assembled, standard air-cooled, temperature range 0 °C to +60 °C

CP6006X-SA-1.6O-32-4R-T
With 8 core Intel® Xeon® D-1539, 32 GByte DDR4, Dual 10Gigabit/s and x4 PCIe Gen 3 on backplane connector J4 (ZDplus), standard air-cooled, temperature range 0 °C to +60 °C

CP6006-SA-2.0O-16-4R-T
With 8 core Intel® Xeon® D-1548, 16 GByte DDR4, backplane connector J4 not assembled, standard air-cooled, temperature range 0 °C to +55 °C

CP6006X-SA-2.0O-16-4R-T
With 8 core Intel® Xeon® D-1548, 16 GByte DDR4, dual 10Gigabit/s and x4 PCIe Gen 3 on backplane connector J4 (ZDplus), standard air-cooled, temperature range 0 °C to +55 °C

Variations of CPU and RMA on request
AccessoriesCP-RIO6-001 4HP 6U RTM: 2x DVI-D; 2x USB2.0; 2x GbE; headers for 2x COM, Flash, SATA, Fan
CP-RIO6-001-HD 4HP 6U RTM: 1x DVI-D; 2x USB2.0; 2x GbE; socket for SATA 2.5” disk; headers for 2x COM, Flash, SATA, Fan
CP-RIO6-001-HD-216 Similar to CP-RIO6-001-HD, but PICMG 2.16 compliant; without external Ethernet
CP-RIO6-001-HD-VGA Similar to CP-RIO6-001-HD, but with VGA interface instead of DVI-D
CP-RIO6-B 4HP 6U RTM: 2x USB, 2x GbE; 2x COM, DVI, HDMI, Connectors for USB Flash, 4x SATA, Fan
CP-RIO6-B-216 Similar to CP-RIO6-B, but PICMG 2.16 compliant; without external Ethernet ports
CP-RIO6-A 4HP 6U RTM: 2x USB, 2x GbE; 2x COM, VGA, Connectors for USB Flash, 4x SATA, Fan
CP-RIO6-A-216 Similar to CP-RIO6-A, but PICMG 2.16 compliant; without external Ethernet ports
CP-RIO6-M 4HP RTM: 2 disk sockets
Recab UK
Interested in this Product?

Get In Touch