Kontron CP3005-SA

3U CompactPCI 9th Gen Intel Core SBC

Manufacturer: Kontron
Kontron CP3005-SA
Introduction

CP3005-SA is the perfect choice for high-performance applications, with an improved performance-per-watt compared to predecessors. The single-slot master CPU cards are based on 8th Gen. Intel® Core™ i5 and i7, Intel’s newest refresh of the 14-nanometer technology with up to 6 cores. Combined with Intel® UHD Graphics P630, It provides a new level of graphics performance compared to previous platform designs. When assembled with the 8th Gen. Xeon® E processor, CP3005-SA is selected for typical server applications and whenever error-correcting code (ECC) memory is a must.

CP3005-SA is built to be used in demanding and harsh environments. It is designed for VITA47 EAC3 and a temperature range of -40°C up to +70°C.  The processor’s TDP can be adjusted dynamically to a desired performance and power envelope. The maturity and future-openness of the CompactPCI form factor are proven in all ECT markets. Typical applications can be found in:

  • Defence 
  • Industrial Plant Control, Machine Control 
  • Energy, Oil & Gas, Mining 
  • Transportation  

10 years lifetime of CP3005-SA or even more, and Kontron’s commitment to a rich CompactPCI portfolio, make CP3005-SA a safe investment with low total-cost-of-ownership.

CPU

CPU Spec8th Generation Intel® processor (14nm technology):
• Intel® Xeon® E-2176M, 6-Core, 2.7 GHz (base), 4.4 GHz (max),with ECC, 12 MByte Cache
• Intel® Core™ i5-8400H, 4-Core, GHz (max),no ECC, 8 MByte Cache
• Others may be follow
9th Gen Intel® processor (14nm technology):
• Intel® Xeon® E-2276ML, 6-Core, 2.0 GHz, with ECC, 12 MB Cache, 25 W TDP
• Intel® Core™ i3-9100HL, 4-Core, 1.6 GHz (base), 2.9 GHz (max), with ECC, 6 MB Cache, 25 W TDP
• Intel® Celeron® G4930E, 2-core, 2.4 GHz, 2 GB Cache, 35 W TDP
ChipsetIntegrated PCH
Mobile Intel® QM370 Platform Controller Hub (Core branded CPU’s)
Mobile Intel® CM246 Platform Controller Hub (Xeon branded CPU’s)
MemoryUp to 32 GByte dual-channel DDR4 SDRAM at 2400 MT/s, via two SODIMM sockets, ECC support by Intel® Xeon® only
GraphicsIntel® UHD Graphics P630 integrated
• up to 3x independent graphics outputs
• Supports DirectX® 12 and OpenGL 4.5
Maximum resolutions
• VGA with a CRT monitor: tbd
• VGA with an LCD monitor: tbd
• DisplayPort: 4096 x 2304 pixels @ 60 Hz
NetworkIntel® i210 and i219LM Ethernet controller: Up to three 1000BASE-T interfaces, two front/rear switchable with WOL (Wake-on-LAN), third available via 8HP extension CP3005-HDD
LAN boot support
StorageM.2 SSD socket for 2242 M.2 SATA modules, enabling 32 GByte up to 512 GByte
Onboard 2.5” SATA SSD/HDD installation on 8HP variants via CP3005-HDD extension
Onboard CFast installation via 8HP extension
Serialdual UART, EXAR XR16L2750
Front I/O1x VGA-CRT 15-pin D-Sub connector
2x USB 2.0 ports, 4-pin standard USB connectors
2x RJ-45 with integrated LEDs (ACT, SPEED)
6x LEDs: 4x POST Code or General Purpose, WD, TH
Rear I/ORear I/O via J2:
• 2x SATA 3Gb/s ports
• 2x Gigabit Ethernet ports without LED signals
• 2x USB 2.0 channels
• 1x VGA analogue port
• 2x COM port RS-232 (LVTTL signal level)
• 5x GPIs and 2 GPOs (LVTTL signal level)
• Reset and power management signals
CommonWatchdog: FPGA-based, timeout ranging from 125ms to 4096s programmable in 16 steps, IRQ, reset, dual-stage configuration
WIBU: WIBU CodeMeter ASIC 1504-03 for Kontron APPROTECT
BIOSAMI uEFI, setup console redirection to serial port (VT100 mode) with CMOS setup access, EFI Shell support, board configuration via Shell, diskless, keyboardless, videoless operation
PlatformInfineon SLB9670 TPM 2.0 controller

GENERAL

ExpansionPICMG 1.0 Rev 3.0 compatible, 32-bit/33MHz (66MHz on request), rear I/O version via J2
Universal 5V and 3.3V PCI signalling voltage supported 7 Req/Gnt & clock lines
Operating in system slot as system master and in the peripheral slot in PCI passive mode
CompactPCI Core Specification PICMG 2.0 Rev. 3.0
CompactPCI Hot Swap Specification PICMG 2.1 Rev. 2.0
ElectricalCP3005-SA with Xeon® E-2176M: typ. W tbd
CP3005-SA with Core™ i5-8400H: typ.W tbd
Mechanical3U 4HP/8HP/12HP CompactPCI, 100 x 160 mm
SoftwareLinux Fedora 21
Windows, VxWorks on request
TemperatureOperating temperature:
• 0 to +60°C, standard
• -40 to +70°C, extended temp.
Storage temperature:
• -40 to +85°C (without additional components)
Humidity93 % RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Weight320 g (CP3005-SA 4HP)
Safety/CertificationUL 60950-1, CSA 22.2 No 60950, EN 60950-1, IEC 60950-1
EMCEN 55022 Class B / EN 55024
Warranty2 Years
RoHSCompliant

 

 

ORDERING DETAILS

BoardCP3005-SA-2.5Q-8-4F-T
CP3005-SA, 2.5 GHz Quad Core™ i5, 8 GByte, 4HP, Front IO only, TPM

CP3005-SA-2.5Q-8-4F-T-E1X
CP3005-SA, 2.5 GHz Quad Core™ i5, 8 GByte, 4HP, Front IO only, TPM, extended temperature -40 °C/+70 °C

CP3005-SA-2.5Q-8-8F-T
CP3005-SA, 2.5 GHz Quad Core™ i5, 8 GByte, 8HP, Front IO only, CP3005-HDD Mezzanine, TPM

CP3005-SA-2.5Q-8-8R-T
CP3005-SA, 2.5 GHz Quad Core™ i5, 8 GByte, 8HP, with Rear IO, TPM

CP3005-SA-2.7S-32-4R-T
CP3005-SA, 2.7 GHz Six Core™ Xeon® E, 32 GByte, 4HP, with Rear IO, TPM

CP3005-SA-2.7S-32-8XR-T
CP3005-SA, 2.7 GHz Six Core™ Xeon® E, 32 GByte, with Rear IO, 8HP with XMC carrier, TPM

CP3005-SA-2.0S-16-4R-T-E1X
CP3005-SA, 2.0 GHz Six Core™ Xeon® E, 16 GByte, 4HP, with Rear IO, TPM, extended temperature -40 °C/+70 °C

CP3005-SA-1.6Q-8-4F-T-E1X
CP3005-SA, 1.6 GHz Quad Core™ i3, 8 GByte, 4HP, Front IO only, TPM, temperature range -40 °C/+70 °C

CP3005-V-2.4D-8-8F-T
CP3005 Value Line, 2.4 GHz Dual Core Celeron®, 8 GByte, Front IO only, 8HP with CP3005-HDD Mezzanine, TPM
AccessoriesCP-SSD-M2-2242-XXXGB-E2 M.2 SATA Flash module 22 x 42 mm, various sizes available, extended temperature -40 °C to +85 °C
CP-SSD-M2-2280-XXXGB-E2 M.2 SATA Flash module 22 x 80 mm, various sizes available, extended temperature -40 °C to +85 °C

CP-RIO3-04 4HP rear I/O module (2x Ethernet, 2x USB, VGA, 2x SATA connectors)
CP-RIO3-08 8HP rear I/O module (additional to 4HP COM1/2)
CP-RIO3-04S 4HP rear I/O module (2x Ethernet, COM, VGA, 2x SATA connectors)

VXW-BSP-CP3005-SA-V7.X VxWorks 7.x Board Support Package
Recab UK
Interested in this Product?

Get In Touch