AITECH C114

UP TO 4 GB (ECC) DDR3 RAM, 2 XMC/PMC SLOTS, QUAD GIGABIT ETHERNET

Manufacturer: Aitech
AITECH C114
Introduction

The C114 is one of Aitech's latest generation VME PowerPC SBCs, based on NXP's new T1/T2 Series QorIQ System-on-Chip (SoC) multi-core processors, with numerous integrated bus, memory, and I/O controllers.

The wide variety of on-board I/O and large memory resources, including on-board mass storage, in combination with the powerful SoC processor, make the C114 the right VME SBC for many applications, out of the box. The industry-standard PMC/XMC slots provide flexibility and expandability, with the availability, convenience, and cost benefits of COTS.

For improved security assurance in real-time/embedded systems, the C114 also includes the latest QorIQ Secure Boot and Trust Architecture.

The C114 board provides the ideal solution for a low power SBC based on NXP Power architecture. The Electrical, Software, and Mechanical interfaces compatibility with Aitech previous generation C108 and C106 SBCs make the C114 the natural upgrade for existing programs that utilize these boards.

The C114 mechanical and electrical designs guarantee its operation over the full range of rugged application environments.

CPU

CPU SpecChoice of
• NXP QorIQ T2081 – 4 dual threaded e6500 cores w/Altivec @ 1.8GHz
• NXP QorIQ T1042 – 4 e5500 cores @ 1.4GHz
Memory4GB of DDR3L SDRAM with ECC @ 1600MT/s
GraphicsN/A
NetworkUp to four Gigabit Ethernet Ports
StorageUp to 64 GB of MLC (Multi-Level Cell) NAND Flash
256MB NOR Flash – 64MB allocated for Boot; 192 MB available to the user
512kB high-speed MRAM with unlimited writes & long term data retention
USBUp to three USB 2.0 Ports
SerialUp to four RS-232/422 and up to six RS-232/422/485 ports
OtherOptional CANbus
Up to two MIL-STD-1553B

GENERAL

ExpansionTwo PMC/XMC Slots:
• Site #1: PMC (64-bit PCI @ 33 MHz, supports 3.3 V PCI I/O signalling levels)
• Site #2: PMC (64-bit PCI/PCI-X @ 133/66/33 MHz, universal site supports 3.3V and 5 V PCI I/O signalling levels) or (XMC PCIe x4 port supporting Gen2 and Gen1 speeds and x4/x2/x1 port widths, 5 V VPWR supply)
ElectricalThe C113is designed to take all its power from the VME64x backplane.
Consumption is 18W to 22W
MechanicalAir-cooled: per IEEE Std 1101.10-1996
Conduction-cooled: per IEEE Std 1101.2-1992
Conformal CoatingConformal coating on request
SoftwareWindRiver VxWorks®, Linux®, and Green Hills INTEGRITY® are supported
TemperatureAir-Cooled Commercial
• Temperature range (operation): 0 to +55C
• Temperature range (storage): -40 to +85C

Air-Cooled Rugged
• Temperature range (operation): -40 to +70C
• Temperature range (storage): -50 to +100C

Air-Cooled Military
• Temperature range (operation): -40 to +85C
• Temperature range (storage): -55 to +125C

Conduction-Cooled Rugged
• Temperature range (operation): -40 to +70C
• Temperature range (storage): -50 to +100C

Conduction-Cooled Military
• Temperature range (operation): -40 to +85C
• Temperature range (storage): -55 to +125C

Ruggedisation level is determined in the part numbering scheme - refer to datasheet for further details
HumidityAir-Cooled Commercial: 0-90%
Rugged or Military: 0-95% or 0 to 100% with coating
WeightAir-cooled: <675g (1.5 lbs)
Conduction-cooled: <800g (1.8 lbs)
AltitudeAir-Cooled Commercial: 15,000 ft.
Air-Cooled Rugged: 35,000 ft.
Air-Cooled Military: 70,000 ft.
Conduction-Cooled Rugged: 35,000 ft.
Conduction-Cooled Military: 70,000 ft.
VibrationAir-Cooled Commercial: As per VITA 47 V1
Air-Cooled Rugged: As per VITA 47 V2
Air-Cooled Military: As per VITA 47 V2
Conduction-Cooled Rugged: As per VITA 47 V3
Conduction-Cooled Military: As per VITA 47 V3
ShockAir-Cooled Commercial: As per VITA 47 OS1
Air-Cooled Rugged: As per VITA 47 OS1
Air-Cooled Military: As per VITA 47 OS1
Conduction-Cooled Rugged: As per VITA 47 OS2
Conduction-Cooled Military: As per VITA 47 OS2
Warranty1 Year
RoHSCompliant

 

ORDERING DETAILS

BoardRefer to datasheet for ordering part number scheme
AccessoriesN/A
Recab UK
Interested in this Product?

Get In Touch