UP TO 2 GB (ECC) DDR SDRAM, 2 PMC SLOTS, 2X 10/100/1000 LAN

Manufacturer: Aitech

The Aitech C6100 is a ruggedized, single-slot PowerPC® SBC based on Emerson's new MVME6100® family of VME processor modules. The C6100 features the MPC7457 G4 PowerPC processor at speed of up to 1.267 GHz for the air-cooled version, and 1.0 GHz for the conduction-cooled configuration, ideal for computation-intensive applications.

The C6100 is the first VMEbus single-board computer (SBC) designed with the Tundra Tsi148 VMEbus interface chip offering 2eSST VMEbus performance. The 2eSST protocol allows the VMEbus to run at up to a practical bandwidth of 320 MB/s. To ensure that the C6100 can handle the 320MB/s data rates of 2eSST, the Tsi148 VMEbus interface chip is connected to one of the 133 MHz PCI-X buses on the host bridge.

This implementation of the Emerson PowerPlusII VME Architecture® provides one of the highest levels of performance and I/O versatility available on a rugged VMEbus board.

The C6100 utilizes leading-edge technologies such as Emerson's low power, high-performance PowerPC processors, a 100 MHz PCI-bus for high throughput onboard peripherals, a new integrated Ethernet bridge and memory controller designed by Marvell, and a sophisticated VMEbus interface, to achieve levels of performance and functionality not previously possible.

The DSP-like AltiVec technology incorporated into the PowerPC processor, allows the C6100 to be used for an assortment of vector processing applications.


CPU SpecG4 MPC7457 PowerPC® with Altivec Technology and up to 1.267 GHz
On-chip 32 kb L1 and 512kb L2 Cache
Two (2) MB of L3 Cache
MemoryUp to Two (2) GB of DDR ECC SDRAM
NetworkTwo (2) GB Ethernet Interfaces (10/100/1000Mbps)
Storage128 MB of User Flash Memory
SerialTwo (2) Asynchronous Serial Interfaces
OtherFour (4) 32-bit Timers
Watchdog Timer
Compatible with Emerson 761-712 IPMC I/O Modules
Rugged/mil Operating Temp Range
Vibration Resistant: up to 7.62 G RMS
Shock Resistant: 30 G, 11ms
Conformal Coating


ExpansionANSI VME64 Compliant
2eSST Support with Legacy VME Backward Compatibility
Two (2) PMC Slots
Electrical+5 V (±5%), 8.4 A (typ), 10.2 A (max)
Not including any power required by PMCs
MechanicalAir cooled: per ANSI/VITA 1-1994
Conduction cooled: per IEEE 1101.2-1992
Both mechanical formats are single slot 6U x 160 mm Eurocard modules.
Conformal CoatingConformal coating on request
SoftwareWindRiver - VxWorks
Other RTOS BSPs may be available upon request
TemperatureSeries-100 Commercial
• Temperature range (operation): 0 to +55C
• Temperature range (storage): -40 to +85C

Series-200 Rugged
• Temperature range (operation): -40 to +71C
• Temperature range (storage): -50 to +100C

Series-400 Military
• Temperature range (operation): -55 to +85C
• Temperature range (storage): -62 to +125C

Ruggedisation level is determined in the part numbering scheme - refer to datasheet for further details
HumiditySeries-100 Commercial: 0-90%
Series-200 Rugged, Series-400 Military: 0-95% or 0 to 100% with coating
AltitudeSeries-100 Commercial: 15,000ft
Series-200 Rugged, Series-400 Military: 70,000ft
VibrationSeries-100 Commercial
• Random (g2/Hz): 20-2000Hz/0.02 g2/Hz
• Sine (g PEAK): 10-100Hz/2g

Series-200 Rugged
• Conduction-cooled: Random (g2/Hz): 20-2000Hz/0.1 g2/Hz
• Conduction-cooled: Sine (g PEAK): 50-500Hz/10g
• Air-Cooled: Random (g2/Hz): 20-2000Hz/0.04 g2/Hz
• Air-Cooled: Sine (g PEAK): 10-100Hz/2g

Series-400 Military
• Conduction-cooled: Random (g2/Hz): 20-2000Hz/0.1 g2/Hz
• Conduction-cooled: Sine (g PEAK): 50-500Hz/10g
• Air-Cooled: Random (g2/Hz): 20-2000Hz/0.04 g2/Hz
• Air-Cooled: Sine (g PEAK): 50-500Hz/5.5g
ShockSeries-100 Commercial: 20g/6mS
Series-200 Rugged: Conduction-cooled: 40g/11ms, 100g/6ms
Series-200 Rugged: Air-Cooled: 30g/11ms, 75g/6ms
Series-400 Military: Conduction-cooled: 40g/11ms, 100g/6ms
Series-400 Military: Air-Cooled: 30g/11ms, 75g/6mS
Warranty1 Year



BoardRefer to datasheet for ordering part number scheme
Recab UK
Interested in this Product?

Get In Touch