Recab UK

Kontron VX3230

Ultra Lower Power SBC, Air Cooled & Conduction Cooled Builds

Manufacturer: Kontron

Introduction

Kontron's VPX3 product family is the ideal solution for rapid bring up and deployments of 3U VPX embedded computers. The VX3230 and its 1 GHz 8544 powerPC processor gives you coolest implementation of a E500 core with plenty of features.

Key Features

Rugged 3U OpenVPX Single-Slot SBC
Freescale MPC8544 running at 1 GHz
1 GB of DDR2-533 SDRAM with ECC
Dual GbE/USb/COM front panel option
XMC/PMC front panel option
0 to 55°C or -40 to +85°C operation

Download Kontron VX3230 Datasheet

CPU
CPU Spec	Freescale MPC8544 running at 1 GHz 32-bit PowerPC E500 Core Double precision embedded scalar and vector floating-point APUs Memory Management Unit (MMU) Integrated Security Engine
Memory	1 GB of DDR2-533 SDRAM with ECC support
Network	Dual Gigabit Ethernet: dual ports configurable either on the front RJ-45 or on the rear VPX backplane connector
Storage	Innovative USB connector allows concurrent Flash disk module AND PMC support Dual SATA-150 ports
USB	USB 2.0 port on rear
Front I/O	Front Panel Interfaces: 2 build options • XMC/PMC front panel, no front Ethernet port • Dual Gigabit Ethernet and USB ports, no XMC/PMC
Rear I/O	VPX: VPX standard on P0/P1/P2 PMC I/Os: 64 bits of I/Os PMC, on P2 Gigabit Ethernet: • Depending on Ethernet interfaces manufacturing option: • Up to 2 1000BASE-T on P1 (VITA 46.9), configurable by firmware or • Up to 2 1000BASE-BX on P1 (VITA 46.9), configurable by firmware PCI Express: 4x PCI Express x1 on P1 (VITA 46.4) Serial: 2x EIA-232/485 serial interfaces on P2, configurable by firmware USB: 2x USB ports on P1 (VITA 46.9), configurable by firmware SATA: 2x Serial ATA ports on P1 (VITA 46.9) Reset: Main reset input available on P0 connector GPIOs: • 3x User GPIOs on P1, including OpenVPX GDISCRETE1, and MASKABLE RESET • 3 additional GPIOs on P0, replacing unused JTAG pins SMB: 2x System Management Bus on P0

GENERAL
Expansion	VPX backplane switch interface: PCI-Express x4
Conformal Coating	SA - Standard Commercial: Conformal coating on request RC - Rugged Conduction-Cooled: Conformal coating as standard
Temperature	SA - Standard Commercial: • Operation: 0 to +55°C • Storage: -45 to +85°C • 1.5 m/s without throttling at 55°C • VITA 47-Class AC1 RC - Rugged Conduction-Cooled: • Operation: -40 to +71°C/+85°C option • Storage: -45 to +100°C • No airflow required, conduction cooled • VITA 47-Class CCE3, CC4 option
Humidity	SA - Standard Commercial: 90% without condensation RC - Rugged Conduction-Cooled: 95% without condensation
Altitude	-1,500 to 60,000 ft (all versions)
Vibration	SA - Standard Commercial: 20-500 Hz - 2g RC - Rugged Conduction-Cooled: 22-2,000 Hz - 5g
Shock	SA - Standard Commercial: 20g/11 ms Half Sine RC - Rugged Conduction-Cooled: 40g/11 ms Half Sine
Warranty	2 Years
RoHS	Compliant

ORDERING DETAILS
Board	VX3230-SAA1N-000 VX3230-SA Air-Cooled Commercial Build, 1 GB SDRAM DDR2, USB Flash Disk slot and XMC/PMC slot VX3230-SAA1N-001 VX3230-SA Air-Cooled Commercial Build, 1 GB SDRAM DDR2, USB Flash Disk slot, no XMC/PMC slot VX3230-RCA1N-000 VX3230-RC Rugged Conduction-Cooled Build, 1 GB SDRAM DDR2, USB Flash Disk slot and XMC/PMC slot
Accessories:	VX3230-RTM PB-VX3-000 VX3230 VPX Rear Transition Module with PIM connector VX3230-RTM PB-VX3-001 VX3230 VPX Rear Transition Module with onboard I/O