Manufacturer: Kontron

VX3035 is based on the second generation of the Intel® Core™ i7 processor. Integrating the Intel® Core™ i7 2655LE processor, Intel® HD graphics and features such as Intel® Turbo Boost technology and Intel® Advanced Vector Extensions (Intel® AVX), the new 3U VPX CPU board defines a new performance class for SWaP (size, weight and power) optimized high-performance embedded computing applications.


CPU SpecSecond Generation Intel® Core™ i7 processor (32nm manufacturing process):
• Intel® Core™ i7-2655LE Processor (4M Cache, 2.20 GHz)
• Dual Core, 25W TFP
ChipsetMobile Intel® QM67 Express Chipset
MemoryUp to 8 GB dual channel DDR3 SDRAM running at 1333 MHz, with ECC, soldered
GraphicsHigh-performance 3D graphics controller integrated in the processor:
• Support for two independent displays
• Supports digital display resolutions up to 2560 x 1600 pixels @ 60Hz
• Supports analog display resolutions up to 2048 x 1536 pixels @ 75Hz
• Dynamic Video Memory Technology (DVMT)
Network3 x GbE, 2 1000BASE-BX with Intel i82580 Ethernet controller (rear),
One 1000BASE-T with i82577 (front or rear, BIOS option)
StorageUSB/SATA NAND Flash: Flash mezzanine socket for USB or SATA NAND Flash modules (typically 8, 16 or 32 GB)
Front I/OVGA: 1 x VGA-CRT 15-pin D-Sub connector
USB: 1 x USB 2.0 ports, 4-pin standard USB connectors
Ethernet: 1 x RJ45 with integrated LEDs (ACT, SPEED)
Serial: 1 x RJ11 one-half modem (with CTS/RTS)
LED´s: 3 bicolour LEDs for system info (fault, proc hot, WD), and user application feedback
Rear I/ORear I/O via P1/P2:
• One x4 PCIe non transparent port
• Four SATA II ports
• Three Gigabit Ethernet ports
• Four USB 2.0 ports
• Two DP ports
• One HDA port
• One PCIe x1 link.
• Two simplified EIA-232/EIA-422 serial (with CTS/RTS)
OtherWatchdog: PLD-based, timeout up to 510s, IRQ, Reset
RTC: Integrated in QM67 with 256 Byte CMOS RAM plus separate ultra low power time of day device

Onboard Interfaces
• Debug Interface: XDP port for processor emulation probe connection
• USB/SATA: 1 x onboard FLASH mezzanine socket for USB or SATA modules
• Top Layer extension: The high-speed I/O connector holds PCIe x4 channel for I/O extensions (XMC, HDD etc), 3.3V Power
• Bottom Layer extension: This connector holds the following interfaces
• • PCIe x1 for any I/O extension mezzanine
• • Four GETH 1000BASE-T signals
• • 3.3V Power
BIOS8 MB FLASH, with recovery image and uEFI BIOS settings


ExpansionVPX Slot Profiles
• SLT3-PAY-2F2U-14.2.3
• SLT3-PAY-1F1F2U-14.2.4
• SLT3-PAY-1F1U-14.2.10
Conformal CoatingSA - Standard Commercial: Conformal coating on request
SoftwareMicrosoft Windows™
WindRiver VxWorks®
Support for other operating systems may be available upon request
TemperatureSA - Standard Commercial:
• Operation: 0 to +55°C
• Storage: -45 to +85°C
• 3.5 m/s airflow required, convection cooled
• VITA 47-Class AC1
HumiditySA - Standard Commercial: 90% without condensation (95% with coating)
Altitude-1,500 to 60,000 ft
VibrationSA - Standard Commercial: 20-500 Hz - 2g
ShockSA - Standard Commercial: 20g/11 ms Half Sine
Warranty2 Years
Recab UK
Interested in this Product?

Get In Touch