Aitech C690

Marvell® Prestera® 98DX4122 Controller, Layer 2 and Layer 3 Management

Manufacturer: Aitech
Aitech C690
Introduction

Aitech’s C690 is a high-performance 3U VPX integrated managed Gigabit Ethernet and PCI Express Switch for embedded and harsh environment applications. Managed switching of up to eight Gigabit Ethernet ports is performed by the Marvell® Prestera® 98DX4122 Gigabit Ethernet Switch Controller and Marvell’s Routing OS.

An embedded web server provides a convenient and intuitive graphical switch management interface via a web browser. Command-line switch management is also supported over network and RS-232 connections.

MAIN SPECIFICATION

FunctionFor more details, refer to datasheet
Interface(s)Gigabit Ethernet Switch
• Unmanaged, No Configuration Required
• Full Wire-Speed Non-Blocking Forwarding
• Three standard port configurations
• 8 x 1000Base-BX/KX
• 6 x 1000Base-BX/KX + 2 x 1000Base-T
• 5 x 1000Base-T
• One additional 1000Base-T Port at Front Panel in air-cooled versions

PCIe Gen2 Switch ? Six PCIe x4 Ports (default configuration)
• User Configurable as up to 20 Ports
• Low Latency Cut-Through Architecture
• Transparent/Non-Transparent Support
Controller(s)PCIe Switch Controller: IDT 89H32NT24AG2
Ethernet Switch Controller: Marvell Prestera® 98DX4122

GENERAL

ExpansionSupported OpenVPX (VITA 65) switch slot profiles vary according to C690 I/O Variant (see I/O below)
SLT3-SWH-6F8U-14.4.9
• Compatible with Variant 1
SWH = Switch board, 6F = Six fat pipes (PCIe x4), 8U = Eight ultra thin pipes (1000Base-BX/KX)

SLT3-SWH-6F6U-14.4.1
• Compatible with Variant 2
• SWH = Switch board, 6F = Six fat pipes (PCIe x4), 6U = Six ultra thin pipes (1000Base-BX/KX)

• SLT3-SWH-4F-14.4.4
Compatible with All Variants
SWH = Switch board, 4F = Four fat pipes (PCIe x4)
ElectricalCurrent is drawn from the backplane +3.3V_AUX supply if available (3.3V is generated onboard is external 3.3V is unavailable)
• +5V and +3.3V_AUX: 3.7A@5V, 0.4A@3.3V, 20W total draw
• +5V only: 4.0A@5V, 20W total draw
MechanicalAir-cooled: 3U VPX REDI per ANSI/VITA 48.1
Conduction-cooled: 3U VPX REDI per ANSI/VITA 48.2
Conduction-cooled 2LM: 3U VPX REDI 2LM (Two-Level Maintenance) per ANSI/VITA 48.2
TemperatureSeries-100 Commercial
• Temperature range (operation): 0 to +55C
• Temperature range (storage): -40 to +85C

Series-200 Rugged
• Temperature range (operation): -40 to +71C
• Temperature range (storage): -50 to +100C

Series-400 Military
• Temperature range (operation): -55 to +85C
• Temperature range (storage): -62 to +125C

Ruggedisation level is determined in the part numbering scheme - refer to datasheet for further details
HumiditySeries-100 Commercial: 0-90%
Series-200 Rugged, Series-400 Military: 0-95% or 0 to 100% with coating
WeightAir-cooled: < 470g 
Conduction-cooled: < 500g 
Conduction-cooled 2LM: < 590g 
AltitudeSeries-100 Commercial: 15,000ft
Series-200 Rugged: 35,000 ft.
Series-400 Military: 70,000ft
VibrationRefer to the table in datasheet
ShockRefer to the table in datasheet
Warranty1 Year
RoHSCompliant

 

ORDERING DETAILS

BoardRefer to datasheet for ordering information
Accessories:  
Recab UK
Interested in this Product?

Get In Touch