congatec conga-TEVAL2 COM Express Type Eval Carrier

congatec conga-TEVAL2

COM Express™ Type 6 Baseboard for COM Express® Basic/Compact Form Factors

Manufacturer: congatec

Introduction

Evaluation Carrier Board for COM Express® Type 6 modules. To achieve a quick start with COM Express® congatec offers an evaluation carrier board, which routes all the COM Express® signals to standard interface connectors. Supports COM Express® Compact and Basic modules using connector Pinout Type 6.

Key Features

COM Express eval board in ATX form factor
1x PCIe x16, 5x PCIe x1, 1x miniPCIe
Uses 12V or ATX DC power supply
Built in microSD Card socket
For COM Express® Type 6 modules

CPU
CPU Spec	COM Express® Pin-out Type 6 Rev. 3.0 compatible COM
Display	3x Dual-Mode DisplayPort \| eDP \| LVDS \| VGA
Network	1x LAN RJ45
Storage	4x SATA; SATADOM support \| SATA Power, SD/SDIO
USB	4x USB 3.1 Type-A \| 2x USB 2.0 Type-A \| USB Client Type-B
Serial	COM RS-232/422/485 \| COM RS-232
Audio	2x Audio Jack (Line Out/MIC In) \| Optical S/PDIF Out \| External Codec header
Other	Power/Reset/Sleep Buttons 2x FAN Feature header CAN Bus Debug POST Display Beeper BIOS SPI Socket

General
Expansion	PCI Express x4 \| 5x PCI Express x1 \| PCI Express for Graphics x16 M.2 key B size 3042/2260/2280 \| mini PCI Express Half/Full size
Electrical	12V or 24 pin ATX DC-In Via external DC jack or internal header
Mechanical	294 x 244 mm
Software	N/A (depends on module)
Temperature	Operation (standard): -40°C to 85°C Operation (storage): -40°C to 85°C
Humidity	Operating: 10% to 90% Storage: 5% to 95%
Warranty	2 Years
RoHS	Compliant

Ordering Details
Board	065810 conga-TEVAL2 Evaluation carrier board for COM Express Type6 Rev. 3.0 modules Please note that boards are supplied with no cables, software or manuals. Software/manuals are available electronically.
Accessories	N/A