congatec conga-SEVAL

Broad Range of Interface Options for Design Development Flexibility

Manufacturer: congatec
congatec conga-SEVAL
Introduction

To achieve a quick start with SMARC, congatec offers an evaluation carrier board, the conga-SEVAL, which routes all the SMARC signals to standard interface connectors.

I/O 

  • 1x PCIe x4 | 1x miniPCIe | 1x PCIe x1 | 1x M.2 socket Key E
  • 1x SATA
  • 1x USB 3.0 | 1x USB 2.0 | 1x micro USB 2.0 (OTG) | 1x USB Type C with PD and DP1 via Alternate Mode
  • 2x RS-232 (1x internal RX/TX on pinheader, 1x RX/TX w/ handshake on DSUB9)
  • 2x CAN
  • GPIO
  • 1x SDIO interface
  • 2x I²C Bus
  • 1x eSPI/SPI1 on header
  • 1x SPI Bus
  • 1x FAN control
  • 1x Disk Drive Power Output

Internal Graphic Interface 

  • 2x24 bit LVDS connector shared with 2x eDP or 2xDSI

 External Graphic Interfaces 

  • 1x DP++
  • 1x HDMI

Audio 

  • I2S Audio interface and HDA interface

CPU

Graphics1x DP++
1x HDMI
2x24 bit LVDS connector shared with 2x eDP or 2xDSI
Network2x Gigabit Ethernet
Storage1x SATA
Expansion1x PCIe x4 | 1x miniPCIe | 1x PCIe x1 | 1x M.2 socket Key E
USB7 USB 3.0
1x USB 2.0
1x micro USB 2.0 (OTG)
1x USB Type C with PD and DP1 via Alternate Mode
Serial2x RS-232 (1x internal RX/TX on pin-header, 1x RX/TX w/ handshake on DSUB9)
Other2x CAN
GPIO
1x SDIO interface
2x I²C Bus
1x eSPI/SPI1 on header
1x SPI Bus
1x FAN control
1x Disk Drive Power Output

 

General

ElectricalATX Power Supply
12V - 24V Wide Range Carrier Board Supply
3.0V - 5.25V Wide Range Module Supply
USB Type C PD (12V - 20V)
Mechanical294 x 172 mm (3.7” x 4.5”)
Warranty2 Years
RoHSCompliant

 

Ordering Details

Board007010
conga-SEVAL
Evaluation Carrier Board for SMARC 2.0 modules.
Accessories077650
conga-SKIT/APL
Starterkit for SMARC 2.0 modules

 

Recab UK
Interested in this Product?

Get In Touch