congatec conga-SMC1/SMARC-ARM

Broad Range of Interface Options for Design Development Flexibility

Manufacturer: congatec
congatec conga-SMC1/SMARC-ARM
Introduction

To achieve a quick start with SMARC, in addition to their standard SMARC evaluation carrier, congatec also offers a ready to use compact carrier board, the conga-SMC1/SMARC-ARM.

Internal connectors and features:

  • 1x LVDS 18/24 bit single/dual channel LVDS
  • 2x optional eDP/DSI (dependent on processor platform)
  • 1x LCD backlight (5V and 12V)
  • 1x SATA Gen3 (support of SATADOM VCC PIN 7 and PIN 8)
  • 1x SATA Power (+5V, +12V)
  • 1x mPCIe full/half-size (support for PCIe Gen3 and USB 2.0)
  • 1x M.2 Type E 2230 (I2S, PCIe Gen3, USB 2.0)
  • 1x M.2 Type B 2242/2280 (2x PCIe Gen 3, USB 2.0)
  • 2x MIPI-CSI
  • 1x Micro SIM (muxed between M.2 Type B and mini PCIe)
  • 2x RS 232/422/485 (COM 0 and COM 2 with handshake)
  • 2x RS232 (COM 1 and COM3 TX/RX only)
  • 2x CAN
  • 1x Micro SD card
  • 1x GPIO connector (up to 8 GPIO)
  • 1x Feature connector (Batlow, Charging, GbESDP, WD)
  • 1x Buttons and LEDs (Power, Reset, Sleep, LID, Power LED, SATA LED)
  • 1x Onboard power button
  • 1x Onboard power state LED
  • 1x SPI/eSPI header
  • 1x I2C header
  • 1x DMIC and analogue front panel audio output
  • 1x 12V FAN connector (4-pin)
  • 1x RTC backup(CR2032)
  • 1x Internal DC-IN

External connectors:

  • 2x GbERJ45
  • 2x USB 2.0
  • 1x USB 2.0 OTG
  • 2x USB 3.0/3.1
  • 1x HDMI
  • 1x DP++
  • 1x Audio Jack 4-pin with I2S audio WM8904
  • 1x External DC-In (12-24V)

CPU

Graphics1x HDMI
1x DP++
1x LVDS 18/24 bit single/dual channel LVDS
2x optional eDP/DSI (dependent on processor platform)
1x LCD backlight (5V and 12V)
Network2x GbERJ45
Storage1x SATA Gen3 (support of SATADOM VCC PIN 7 and PIN 8)
1x SATA Power (+5V, +12V)
1x Micro SD card
Expansion1x mPCIe full/half-size (support for PCIe Gen3 and USB 2.0)
1x M.2 Type E 2230 (I2S, PCIe Gen3, USB 2.0)
1x M.2 Type B 2242/2280 (2x PCIe Gen 3, USB 2.0)
1x Micro SIM (muxed between M.2 Type B and mini PCIe)
USB2x USB 2.0
1x USB 2.0 OTG
2x USB 3.0/3.1
Serial2x RS 232/422/485 (COM 0 and COM 2 with handshake)
2x RS232 (COM 1 and COM3 TX/RX only)
Other1x GPIO connector (up to 8 GPIO)
1x Feature connector (Batlow, Charging, GbESDP, WD)
1x Buttons and LEDs (Power, Reset, Sleep, LID, Power LED, SATA LED)
1x Onboard power button
1x Onboard power state LED
1x SPI/eSPI header
1x I2C header
1x DMIC and analog front panel audio output
1x 12V FAN connector (4-pin)
1x RTC backup(CR2032)
1x Internal DC-IN

 

General

ElectricalExternal and internal DC-In (12-24V Wide Range Carrier Board Supply )
Mechanical146 x 102 mm (approx. 5.75" x 4.02")
Warranty2 Years
RoHSCompliant

 

Ordering Details

Board020750
conga-SMC1/SMARC-ARM
Compact sized SMARC 2.0 Carrier Board for ARM-based SMARC Modules
AccessoriesN/A

 

Recab UK
Interested in this Product?

Get In Touch