CONNECT TECH XTREME I/O EXPRESS ADC-DAC- PCIE/104 ANALOG I/O MODULE

32 12/16-BIT ANALOG INPUTS, 4 16-BIT ANALOG OUTPUTS, 16 DIGITAL I/O, FULL -40/+85 OPERATING

Manufacturer: Connect Tech Inc
CONNECT TECH XTREME I/O EXPRESS ADC-DAC- PCIE/104 ANALOG I/O MODULE
Introduction

Connect Tech's Xtreme I/O ADC-DAC is an analog and digital peripheral board for the PCIe/104 small form factor embedded marketplace. This product is ideal for data acquisition, measurement and control applications. The flexibility of the FPGA technology applied to the Xtreme Express I/O ADC-DAC enables high functionality integration and customization to meet application requirements.

The Xtreme I/O Express  ADC-DAC use 4 ADC IC's which are interfaced to the on-board FPGA. Each of these ADC IC's have an 8-channel multiplexer that allow for the sampling of 8 single ended channels or 4 differential channels.

For the analog outputs, the Xtreme I/O Express  ADC-DAC uses a 16-bit 4-channel DAC IC which is interfaced to the on-board FPGA. Each of the 4 analog output channels from the DAC can be controlled independently from the DAC command register.

The Xtreme I/O Express  ADC-DAC has 16-bits of bi-directional GPIO that can be configured to operate with +3.3V or +5V logic levels. 

Lastly, the Xtreme I/O Express ADC-DAC supports harsh environments with demanding conditions with an extended temperature range of -40°C to +85°C .

ANALOG INPUTS

Number Of Outputs32 Single Ended, split into 4 groups of 8
Resolution16-bit
RangeBipolar: ±10.24V, ±5.12V and ±2.56V
Unipolar: 0 - 10.24V and 0 - 5.12V
Max Sample Rate500 Ksps (per channel)
62.5 Ksps (per group)
Overvoltage Protection±20V
Input Impedance1M Ohm
AccuracyDNL: ±0.5 LSB, INL; ±0.75
CalibrationBuilt in temperature auto calibration
OtherSignal-to-Noise Ratio: 92 dB; TDH: -102 dB

 

ANALOG OUTPUTS

Number Of Outputs4, 16-bit resolution
Resolution16 bits (1/65,536 of full scale)
Current±3mA
RangeUnipolar: 0V to 15V
Bipolar: ±10V
Settling time6 microseconds

 

DIGITAL I/O/COUNTER/TIMERS

I/Os16-bit bidirectional I/O
InputsHardware selectable +3.3V or +5V(TTL/CMOS)
OutputsHardware selectable +3.3V or +5V(TTL/CMOS)
24mA

GENERAL

ExpansionPCIe/104
PCI-104 (32 bit) interface can optionally be installed for pass-through operation
ElectricalTBC
MechanicalDimensions: 96mm x 90mm
Conformal CoatingOn request
SoftwareCustom CTI Device Drivers for QNX, Linux, Windows
Device can also be controlled directly from a memory mapped register set in any operating system
TemperatureTemperature range (operation): -40°C to +85°C
Temperature range (storage): -40°C to +85°C
Humidity0-90% non-condensing
Weight3.4oz/96g
WarrantyLifetime
RoHSCompliant
Recab UK
Interested in this Product?

Get In Touch