CONNECT TECH ADG016

INSTALL EITHER A PCIE/104 OR A PCI/104-EXPRESS CARD INTO A STANDARD PCI EXPRESS SYSTEM SLOT

Manufacturer: Connect Tech Inc
CONNECT TECH ADG016
Introduction

This convenient adapter board allows users to install either a PCIe/104 or a PCI/104-Express card into a standard PCI Express system slot.

The adapter features both a PCIe/104 and a PCI-104 connector. The passive PCI-104 connector has all critical PCI input signals tied off to safe levels to avoid damaging a dual-bus card, while at the same time provides extra mechanical stability for PCI/104-Express cards.

STANDARD USAGE

This adapter supports any x1 lane PCI/104-Express or PCIe/104 add-in card. Simply mount the add-in card to the adapter and install the adapter in a PCI Express slot. Most PCI/104-Express and PCIe/104 cards will require the connection of an IDE power cable to the P3 connector on the card. This cable provides the 5V rail to the add-in card.

Once everything is connected, you may begin using the add-in card just as you would any other PCI Express add-in card. No additional configuration is required.

INTERFACE

FeaturesPCIe/104 and PCI/104-Express compatible
Industrial temperature range of -40º C to 85º C
PCIe/104 156 pin connector
PCI-104 120 pin connector
+5V input for PCIe/104 add-in card
x1 lane PCI Express card edge allows installation in any slot width
Complies with PCI Express 1.1 electromechanical requirements

GENERAL

Expansionx1 lane PCI Express card
ElectricalN/A (power for I/O board comes via PCIe interface (12V) or separate power connector (5V)
Mechanical4.050” wide by 4.375” tall
Conformal CoatingOn request
SoftwareN/A
TemperatureTemperature range (operation): -40°C to +85°C
Temperature range (storage): -40°C to +85°C
Humidity95% non-condensing
WarrantyLifetime
RoHSCompliant
Recab UK
Interested in this Product?

Get In Touch