TRIMBLE LV59

SUPPORTS GPS L1/L2/L5 , GLONASS L1/L2/L3, GALILEO E1/E2/E5 AND SBAS

Manufacturer: Trimble
TRIMBLE LV59
Introduction

The Trimble LV59 GNSS Antenna has been designed to support centimetre level accuracy on land and marine applications. The rugged 5/8" x 11 female threaded mount and all aluminium base allow the antenna to be used in the most rugged of environments.

COMPREHENSIVE GNSS SUPPORT

The Trimble LV59 GNSS antenna offers support for present and future GNSS signals, including GPS L5, GLONASS and Galileo. This ensures that the antenna will operate with your present and most likely future GNSS receivers.

ROBUST, LOW-MULTIPATH ANTENNA

The antenna resists unwanted signal interference or multipath, which can cause inaccurate measurements. Multipath is caused by signals being reflected from surfaces such as the ground, surrounding trees, or buildings.

FLEXIBILITY

The antenna is a survey rover type of design. This allows the use of standard survey accessories for either pole or vehicle mounting. Alternatively, create your own 5/8" x 11 bolt mounting. This is an ideal design for customers building systems that require easy removal of the antenna. The TNC connector is located on the underside of the unit ensuring the attached cable is also protected from the environment.

ANTENNA SPECIFICATION

ConnectorTNCF female signal connector
FrequencyBroad GNSS Frequency Tracking Band Including:
• GPS: L1, L2, L5
• GLONASS: L1, L2, L3
• BeiDou: B1, B2
• Galileo: E1, E2, E5,
• SBAS: WAAS, EGNOS, QZSS, Gagan, MSAS, and OmniStar
Gain39 dB
Impedance50 Ohms
PolarizationRight Hand Circular
VSWRLess than or equal to 2.0:1
OtherQuality signal tracking
Small cross-sectional area to reduce wind loading
Low voltage, low power consumption
Integral low noise amplifier
5/8” x 11 UNC female threaded aluminium mounting point
Powered by GNSS receiver via coaxial cable
Rugged UV resistant radome and aluminium base designed for machine environments
High gain for reliable tracking in difficult environments
Axial Ratio: 3 dB Max @ boresight
Amplifier Noise Figure: 2.6 dBMax
Finish: UV resistant white radome with aluminium base

GENERAL

Electrical4.2 V DC to 15 V DC
Mechanical14.62 cm diameter x 3.89 cm height (5.575 in diameter x 1.53 in height)
TemperatureTemperature range (operation): -40 to +85°C
Temperature range (storage): -40 to +85°C
ConditionsDO-160D SectionString CategoryDescription
Temperature
Variation
5
 

A
 

-55ºC to +85ºC,
10º/min, 2 cycles
Humidity-Method 507.4MIL-STD-810-F
Shock-Method 516.5MIL-STD-818-F
Procedure II
Vibration-Method 514.5C-3MIL-STD-810-F
Section 514.5-CVII
HumiditySee above
Weight0.48 Kg (1.06 lb)
Altitude16,764 m (55,000 ft) max
VibrationSee above
ShockSee above
Warranty1 Year
RoHSCompliant

 

ORDERING DETAILS

BoardC03167 Trimble LV59 L1/L2/L5/G1/G2/Omnistar Aviation Antenna (Not TSO Certified) 5/8 Mount
AccessoriesA02500 10m TNC-TNC Antenna Cable
64922-30 30m TNC-TNC Antenna Cable
Recab UK
Interested in this Product?

Get In Touch