eCOUNT CRTtoLCD-62

Flat Panel Controller Board, up to 1920×1200, DisplayPort, VGA & DVI input

Manufacturer: eCOUNT Embedded
eCOUNT CRTtoLCD-62
Introduction

The CRTtoLCD-62 is a highly integrated Full-HD-Flatpanel-Controller that allows the connection of standard Analog RGB (VGA), DVI-D and DisplayPort sources to TFT-LCD flat-panels.

It includes all the necessary functionality to design a full-featured LCD monitor.

From a single +12V DC power supply, the CRTtoLCD-62 generates all required supply voltages and power sequencing. LED or CCFL backlight dimming is supported and can be controlled by PWM or absolute voltage level.

TECHNICAL INFORMATION

InputsDVI Input:
• Highest quality up to WUXGA@60 Hz (with full zoom & shrink capabilities)
VGA Input:
• Analog-RGB-Interface (VGA) up to WUXGA@60 Hz,
• All colour depths up to 24 bits/pixel
• Composite-Sync and Sync-on-Green (SOG) support
DisplayPort Input:
• DisplayPort 1.1 compliant receiver
• Up to 1920x1200@60Hz (WUXGA)
OutputsJILI30 (up to 24Bit dual-channel LVDS)
30Bit dual-channel LVDS via additional connector
Output up to WUXGA@60 Hz (1920x1200)
SoundN/A
Features

High-Quality Advanced Scaling
• Horizontal & Vertical Zoom

Specials
• Two separate onboard power supplies for flat-panel (up to 3A) and backlight (up to 3.5A) power
• Onboard Temperature Sensor and Elapsed Hour Meter for predictive maintenance options
• PWM or voltage-controlled backlight dimming
• Scripting support
• DDC2Bi / VCP (also accessible via script)
• Serial-API for full access to various functions and features
• Serial-OSD for keypad-less OSD control

Integrated On-Screen-Display
• On-Screen Display (OSD) for control of all configured features

OptionsInverter and display cable-kits for various flat panels

GENERAL

Electrical12.0 V DC
CRTtoLCD-62 with input signal (WUXGA), Panel file (WUXGA): 212 mA
CRTtoLCD-62 with power down: 65 mA
Mechanical118.60 mm x 95.0 mm x 16.5 mm (L/W/H)
TemperatureTemperature range (operation): 0C to +60˚C
Temperature range (storage): -10 to +85˚C
HumidityOperating: 10% - 90% RH non-condensing
Non-operating: 5% - 95% RH non-condensing
Shock:5G/20ms square wave maximum
Vibration:1G/0-600Hz, dwell not to exceed
MTBFIn excess of 200.000 hours @ 25°C
Software.Powerful configuration tool available
Warranty2 Years
RoHSCompliant

 

ORDERING DETAILS

Board21122E-00-01-01
CRTtoLCD-62 Full-HD-Flatpanel-Controller with VGA(Analog-RGB), DVI-D and DisplayPort inputs, Dual-channel LVDS output, Temp-Sensor and Elapsed Hour Meter retrievable by OSD or serial interface
Accessories 22010
OSD-Panel-Set 5-button On-Screen-Display(OSD)-Keypad incl. cable

61021E
KAB-COMtoTTL Serial-RS232 to TTL converter cable for CRTtoLCD-51-pro/-61-pro/-62/-71-LP/-61-LP
Recab UK
Interested in this Product?

Get In Touch