eCOUNT CRTtoLCD-71

Flat Panel Controller Board, up to 1920×1200, DisplayPort, VGA & DVI input

Manufacturer: eCOUNT Embedded
eCOUNT CRTtoLCD-71
Introduction

The CRTtoLCD-71 is Full-HD-Flatpanel Controller that allows the connection of standard Analog-RGB, DVI, DisplayPort, Composite-Video, S-Video and Component-Video sources to TFT-LCD flat panels.

From a single +12 to 24V DC power supply, the CRTtoLCD-71 generates all required supply voltages and power sequencing. LED or CCFL backlight dimming is supported and can be controlled by PWM or absolute voltage level.

The Multi-Standard Video-Decoder handles PAL, NTSC, SECAM and other video formats.

TECHNICAL INFORMATION

InputsDVI Input:
• 1x DVI DVI/HDMI 1.3 compliant input
• Up to 1920x1200@60Hz (WUXGA)
VGA Input:
• Via DVI-I connector
• 10-bit triple ADCs with capture up to 205 MHz
• Input resolution support up to WUXGA@60Hz
• Composite-Sync and Sync-on-Green (SOG) support
DisplayPort Input:
• DisplayPort 1.1 compliant receiver
• Up to 1920x1200@60Hz (WUXGA)
Other:
• Composite Video (CVBS)
• S-Video
OutputsJILI30 (up to 24Bit dual-channel LVDS)
30Bit dual-channel LVDS via additional connector
Output up to WUXGA@60 Hz (1920x1200)
Sound1x Stereo output (line level), 2x Stereo inputs
Features

Video Decoder (integrated)
• 3D adaptive comb filter
• SD-TV (CVBS, S-Video and analogue component input)
• HD-TV (Analog component input only)

Picture and Scaling
 Highest quality scaling and full zoom & shrink capabilities
• Picture-In-Picture (PiP)
• FAROUDJA TRUELIFE and REAL COLOR Video Enhancer
• FAROUDJA DCDI CINEMA format conversion

Specials
• Wide range input power supply 12 V- 24 V-DC
• Flatpanel power up to 3A, Backlight power up to 3.5A
• Ambient Light Sensor(ALS) support
• Multi purpose GPIO’s( PWM / I²C ) and analogue inputs
• Embedded scripting engine
• DDC2Bi / VCP support, HDCP 1.2a compliant
• 2x RS232 interfaces
• Serial-API for full access to various functions and features
• Serial-OSD to keypad-less OSD control

Integrated On-Screen-Display
• On-Screen Display (OSD) for control of all configured features

OptionsInverter and display cable-kits for various flat panels

GENERAL

Electrical12.0 V DC to 24V DC
CRTtoLCD-71-LP (normal operating): 386 mA @ 12V DC
CRTtoLCD-71-LP (Soft-Power-Down / Standby): 105 mA @ 12V DC
MechanicalDimension (Module): 179 mm x 114 mm x 16mm (L/W/H)
TemperatureTemperature range (operation): 0C to +60˚C
Temperature range (storage): -10 to +85˚C
HumidityOperating: 10% - 90% RH non-condensing
Non-operating: 5% - 95% RH non-condensing
Shock:5G/20ms square wave maximum
Vibration:1G/0-600Hz, dwell not to exceed
Software.Powerful configuration tool available
Warranty2 Years
RoHSCompliant

 

ORDERING DETAILS

Board21115E-00-01-01
CRTtoLCD-71 Multimedia Full-HD-Flatpanel-Controller with Analog-RGB(VGA) via DVI-I, DisplayPort and PAL/NTSC/SECAM video inputs and Dual-channel LVDS output
Accessories 22011E-00-01-01
OSD-Panel-Set-LP 5-button keypad with dual colour LED(red/green) IR-Receiver, Ambient Light Sensor (ALS) incl. cable

61004E
Serial-RS232 connection cable for CRTtoLCD-71

61017E
KAB-IR Infrared(IR) connection cable to be used in combination with standard remote control according to RC5-Standard for CRTtoLCD-71
Recab UK
Interested in this Product?

Get In Touch