Recab UK

AITECH M611

PROVIDES FOUR (4) 10BASE-T AND 100BASE-TX ETHERNET PORTS.

Manufacturer: Aitech

Introduction

Aitech’s M611 is a high-performance Gigabit Ethernet XMC for embedded harsh environment applications. The M611 is based on the Intel 82580 Quad-Port Gigabit Ethernet controller, which also provides the M611 PCIe x4 Gen2 host interface. The M611 supports both copper (10/100/1000Base-T) and SerDes (1000Base-BX/KX) physical interfaces and can be used on a variety of platforms, under common operating systems.

Key Features

Quad Gigabit Ethernet XMC Card
4 x 10/100/1000Base-T Ports
At P16, P14, or Front Panel RJ45 connectors
Intel Quad GbE Controller
PCIe x4 Gen2 Host Interface
Conduction cooled or air cooled versions
Vibration and Shock Resistant
Up to -55 to +85C operation

ETHERNET/WLAN
Function	GbE Controller: • IEEE 802.3x Flow Control • 9.5 kB Jumbo Frame support • Checksum offloading capabilities • TCP/UDP segmentation • PXE client support • Supports both IPv4 and IPv6 • IEEE 1588 Precision Time Protocol • IEEE 802.1q VLAN support • Supports half & full duplex at 10/100 Mb/s, full duplex at 1000 Mb/s • Large on-chip Tx and Rx FIFO buffers • Optimized Tx and Rx queues • Caches up to 64 packet descriptors (per queue) • 8 Tx and 8 Rx queues per port • Wide, pipelined internal data path architecture • Descriptor ring management hardware for Tx and Rx • Optimized descriptor fetching and write-back mechanisms
Interface(s)	Each port factory configured as 1000Base-T or 1000Base-BX/KX (SerDes), routed by factory configuration to P16, P14, or front panel connectors. See Standard Configurations below. • 10/100/1000Base-T ports with IEEE 802.3ab compliant and compatible PHYs, onboard GbE magnetics, and auto-negotiation and auto cross-over (MDI/MDI-X) support • 1000Base-BX/KX ports support backplane applications and external SFP modules
Controller(s)	Intel 82580 Quad-Port Gigabit Ethernet Controller

GENERAL
Expansion	PCIe x4 port at P15 supports Gen2 and Gen1 speeds and port widths of x4/x2/x1
Electrical	Total power consumption: 4.5 W • Typical: 1A@3.3V, 3.3W • Max: 1.5A@3.3V, 5.0W
Mechanical	Single-Width XMC per ANSI/VITA 42.0-2008 Dimensions as per ANSI/VITA 42.0-2008
Conformal Coating	Conformal coating on request
Software	Microsoft Windows®, Linux®, Wind River VxWorks®, and Green Hills INTEGRITY® are supported
Temperature	Series-100 Commercial • Temperature range (operation): 0 to +55C • Temperature range (storage): -40 to +85C Series-200 Rugged • Temperature range (operation): -40 to +71C • Temperature range (storage): -50 to +100C Series-400 Military • Temperature range (operation): -55 to +85C • Temperature range (storage): -62 to +125C Ruggedisation level is determined in the part numbering scheme - refer to datasheet for further details
Humidity	Series-100 Commercial: 0-90% Series-200 Rugged, Series-400 Military: 0-95% or 0 to 100% with coating
Weight	Conduction-cooled: < 110 g [0.25 lbs] Air-cooled: < 120 g [0.26 lbs]
Altitude	Series-100 Commercial: 15,000ft Series-200 Rugged: 35,000ft Series-400 Military: 70,000ft
Vibration	Series-100 Commercial • Random (g2/Hz): 20-2000Hz/0.02 g2/Hz • Sine (g PEAK): 10-100Hz/2g Series-200 Rugged • Conduction-cooled: Random (g2/Hz): 20-2000Hz/0.1 g2/Hz • Conduction-cooled: Sine (g PEAK): 50-500Hz/10g • Air-Cooled: Random (g2/Hz): 20-2000Hz/0.04 g2/Hz • Air-Cooled: Sine (g PEAK): 10-100Hz/2g Series-400 Military • Conduction-cooled: Random (g2/Hz): 20-2000Hz/0.1 g2/Hz • Conduction-cooled: Sine (g PEAK): 50-500Hz/10g • Air-Cooled: Random (g2/Hz): 20-2000Hz/0.04 g2/Hz • Air-Cooled: Sine (g PEAK): 50-500Hz/5.5g
Shock	Series-100 Commercial: 20g/6mS Series-200 Rugged: Conduction-cooled: 40g/11ms, 100g/6ms Series-200 Rugged: Air-Cooled: 30g/11ms, 75g/6ms Series-400 Military: Conduction-cooled: 40g/11ms, 100g/6ms Series-400 Military: Air-Cooled: 30g/11ms, 75g/6mS
Warranty	1 Year
RoHS	Compliant