KONTRON XMC402

DESIGNED FOR EMBEDDED APPLICATIONS

Manufacturer: Kontron
KONTRON XMC402
Introduction

The XMC402 dual 10G Ethernet Mezzanine is designed to fit on CompactPCI, VME, or VPX Single-Board Computers or carriers with XMC sockets.

It provides two independent 10G Ethernet copper interfaces through RJ45 connectors. 

In addition to the great processing performance on Kontron´s CPU side, the next generation 10 Gigabit Switched Mezzanine Card (XMC) provides sufficient data throughput for today's Ethernet networks. Two 10GbE ports attached by PCIe x8 to the host computer, combined with new capabilities and enhancement of the Intel® X540 10 Gigabit Ethernet controller, helps unshackle processors from their predecessor’s network I/O handcuffs and unleashes blazing performance in a variety of usage models. Supporting latest Intel VT technologies, Kontron provides the platform foundation for virtualization and storage over Ethernet usages and provides new opportunities to more efficiently utilize network links. Offering the possibility of either one or two channels, as well as the support of copper (CAT6A) transmission, the XMC402 allows a maximum flexibility.Furthermore, it supports intelligent behaviour through the auto detection feature of copper network configurations.

ETHERNET/WLAN

FunctionStatus LED: 8 LEDs for Link activity, Link-up, 1/10 Gb speed
Flash Memory: 8 Mbit serial flash device for BOOT ROMs
Serial EEPROM:
• 128kbit serial EEPROM for configuration data
• 2 kbit serial EEPROM for IPMI FRU data
Interface(s)Two 10 Gbit RJ45 copper interfaces (10GBASE-T)
Controller(s)Intel® X540 10 Gigabit Ethernet controller
Connection(s)Two front panel RJ-45 connectors with integrated magnetics and status LEDs

GENERAL

ExpansionXMC PCI Express™ Gen 2.0 x8 interface
Electrical7.5 Watt typical
MechanicalAccording VITA42.0/3/6
IEEE 1386.1-2001
Dimensions : 74 W x 149 D mm, single XMC card
Conformal CoatingConformal coating on request
SoftwareLinux, Windows, VxWorks
Other Drivers on request
TemperatureTemperature range (operation): 0 to +55°C
Temperature range (storage): -55 to +85°C
Passive heatsink, forced system air flow
Humidity93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Weight100gr
AltitudeUp to 4000 m (13123 ft) above sea level
MTBF1181332 h MIL-HDBK-217 FN2 Ground Benign 30°
1133166 h Bellcore Issue 6 Ground Benign 30°
Safety/CertificationEN60950-1
EMCEN55022 class.B / EN55024
Warranty2 Years
RoHSCompliant

 

ORDERING DETAILS

BoardXMC402 Dual 10G Base-T eXtended Mezzanine Card
AccessoriesN/A
Recab UK
Interested in this Product?

Get In Touch