Diamond Systems EPS-24G4X

Managed 28-Port GbE Switch, 4 10G SFP, Wide Voltage Input and Serial Management Port

Introduction

The EPS-24G4X is a managed Ethernet switch based on Diamond's EPSM-10GX4 switch module. The switch implements all features of the style='text-decoration: underline'>EPSM-10GX4 Ethernet switch module, including 24 10/100/1000Mbps copper ports and 4 10Gbps SFI ports accessed via SFP+ sockets. Depending on the ordering configuration, the switch contains embedded software supporting Layer 2 switching, Layer 3 routing/switching, and optional IEEE1588 PTP operation.

Two software packages are available, Layer 2+ switching and Layer 3 routing/switching. In addition, IEEE-1588 precision time protocol support is available with a minor modification to support an external precision clock circuit and 1pps signal source provided by the carrier board. All software features are manageable via a GUI web interface accessible over any port, as well as with a command language accessed via a built-in RS-232 port.

EPS-24G4X is designed specifically to meet the challenges of vehicle and other rugged environments, with its -40/+85°C operating temperature range, 50% thicker PCB, latching I/O connectors, and its MIL-STD-202G shock/vibration resistance. A wide-range input power supply with built-in transient protection provides compatibility with a range of industrial and vehicle power supplies. The board also forms the heart of Diamond’s SabreNet-24000 rugged Ethernet switch. Cooling for EPS-24G4X is provided via two heat sinks: a low-profile heat sink between the carrier board and the EPSM module and a taller heat sink for the EPSM module.

The EPS-24G4X is included as part of the EPSM-10GX4 development kit. Schematics and bill of materials are included to simplify the development of custom advanced Ethernet switching solutions based on the EPSM-10GX4 module.

Main Specification

Function28-port Layer 2/3 switch
Built-in 500MHz MIPS 24KEC microcontroller for configuration and management
Hierarchical MEF compliant policing & scheduling; MEF E-Lane, E-Line, and E-Tree services
Jumbo frame support at all speeds
VLAN
• IEEE 802.1Q VLAN switch with 32K MACs and 4K VLANs
• Push/pop up to three VLAN tags
• Independent & shared VLAN learning (IVL, SVL)
IPv4/IPv6 unicast & multicast group support
Rapid spanning tree protocol (IEEE 802.1W) and MTSP
ActiPHY and PerfectReach power management; VeriPHY cable diagnostics
1PPS input option for IEEE1588 timing support (requires advanced software package, upon request)
Interface(s)24 10/100/1000Mbps Ethernet ports with non-blocking wire-speed performance
2 10G SFI ports for use with SFP+ 10G fibre/copper sockets
Connection(s)Serial Port
• 1 RS-232 port for host interface via header

Ethernet:
6 latching headers for standard Ethernet ports (four per header)
4 SFP+ sockets

Status LEDs for all ports

 

General

Electrical7-40V DC input power range

Example consumption:
Vin = 24VDC:
13W, all ports idle
20W, all 24 1G ports active
26W, all 24G ports and all 4 10G ports active
Mechanical3.5 inch form factor, 4.00”H x 5.75”W / 102 x 146 mm
Conformal CoatingOn request
SoftwareThe switch is ready to plug into your application without any driver installation or firmware upgrades
A web interface and a CLI provide an intuitive GUI for configuring and managing the switch
TemperatureTemperature range (operation): -40 to +85°C
Temperature range (storage): -40 to +85°C
Humidity5% - 95% relative humidity
Weight237 grams (8.35 oz.)
VibrationMIL-STD-202G shock/vibration compatibility test pending
ShockMIL-STD-202G shock/vibration compatibility test pending
Warranty2 Years
RoHSCompliant

 

Ordering Details

BoardEPS-24G2X
Epsilon 26 port Ethernet switch with 24 10/100/1000 ports + 2 10G SFI ports
AccessoriesK-EPS24G2X-01
Cable kit including 6 4-port 10/100/1000 Cat 6 RJ-45 cables, power cable, and serial interface cable
Recab UK
Interested in this Product?

Get In Touch