KONTRON CP6940

Manufacturer: Kontron
KONTRON CP6940
Introduction

CP6940 is a fully managed layer 2&3 1/10/40 Gigabit Ethernet switch for CompactPCI® and VME embedded systems. It is designed for long-term programs and use in harsh environments and in an extended temperature range from -40°C to +85°C. It is ideally suited for multi-CPU high-performance servers in the aerospace or defence sector as well as for communication networks of all types. Moreover, it is produced in Europe.

HIGH BANDWIDTH UP TO 2X 40G AND OPTIMIZED FOR MULTICAST COMMUNICATION

The CP6940 design relies on Broadcom's highly integrated single-chip switch technology and an additional high-performance QorIQ® microcontroller. This enables higher throughput in multicast traffic through faster data routing setup and significantly higher protocol processing performance. The CP6940 supports QSFP+ modules for high-performance network connections via 2x40G or 8x10G ports, as well as SFP+ modules for different transfer rates of 1, 2.5, 5 and 10GBase-x. The cost-optimized Value version supports Layer 2 for standard environments.

LAYER 2 AND 3 SWITCHING AND ROUTING WITH FULLY DEVELOPED MANAGEMENT

The switch complies with the two conformity standards PICMG® 2.16 for CompactPCI® and VITA31.1 for VME. It works non-blocking and offers Layer 2 and 3 functionality with fully developed management. Features such as Hot Swap, Intelligent Platform Management Interface (IPMI), SNMP protocol and integrated test options make administration, monitoring and maintenance simple and time-saving. The rich feature set includes support for IPv4/IPv6 forwarding and multicast, routing, switching, quality of service, VLANs, Spanning Tree Protocol (STP, RSTP, MSTP), time synchronization via 802.1AS and access control. The switch can be upgraded to a Time-Sensitive Networking (TSN) switch with the corresponding software.

CP6940 variants are largely backwards compatible to CP6930 and CP6924

GENERAL

ExpansionCompactPCI® Core Specification PICMG 2.0 Rev. 3.0
CompactPCI® HotSwap Specification PICMG 2.1 R 2.0
CompactPCI® System Management PICMG 2.09 R 1.0
CompactPCI® Packet Switching Backplane PICMG 2.16 R. 1.0
VME64x Packet Switching Backplane VITA 31.1
Intelligent Platform Management Interface Specification V1.5
Electricalmax. 60 W
Mechanical233.5 mm x 160 mm, 6U 4HP (single slot)
TemperatureOperating:
• CP6940-RA variants: -40 to +85°C
• CP6940-SA variants: 0 to +60°C
• forced air cooling required
Storage: -50 to +100°C
Humidity93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Weightapprox. 800 g
VibrationIEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-29
Designed to meet VITA47, class EAC6, V2 (CP6940-RA versions)
ShockIEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-29
Designed to meet VITA47, class EAC6, V2 (CP6940-RA versions)
MTBF>140,000 h @ 30C, based on Bellcore Issue 6, Ground Benign, Controlled
>100,000h @ 30C, based on MIL-HDBK-217 FN2, Ground Benign, Controlled
Safety/CertificationIEC61010-1, designed to meet UL61010-1 and CSA22.2 No.950,
LVD 73/23/EEC, Denan Law compliant
EMCEN61000-6-2, NEBS GR-1089-CORE Issue 6, CP61000-6-3
Warranty2 Years
RoHSCompliant

MAIN SPECIFICATION

FunctionManagement via SNMP, Command Line (Telnet, SSH)
- In-band
- Out of band via Ethernet or RS232
IPMI version 1.5, Power On Self Test
DHCP server, relay and Boot media NTP server feature
Interface(s)Common:
• 24x 10/100/1000 Base-T link ports on the backplane or RTM acc. PICMG2.16 / VITA31.1
• 1x 10/100Base-T for Management (RJ45 connector)
• 1x RS232 for Management (RJ45 connector and backplane)
• Reset Switch
• Status LEDs

Options:
• SGMII/1000Base-X uplinks for SFP optical transceivers (2x for CP6940-RA, 6x for CP6940-SA)
• 1/2.5/5/10GBase-X uplinks for SFP+ optical transceivers (4x only for CP6940-RA)
• 10/100/1000GBase-T uplinks for RJ45 (4x but not for CP6940-RA-OC-P)
• 40GBase-X uplinks for QSFP+ or alternatively 4x 1G/10GBase-X via break-out cable (2x only for CP6940-RA-OC-P)
Controller(s)Broadcom BCM56174 Ethernet Switch
Onboard NXP QorIQ® Layerscape 1020A
NXP micro-controller for IPMI

 

ORDERING DETAILS

Board34027
CP6940-RA-OC-P
Performance Rugged GbE Switch. Full L2/L3 management. Rear: 24x Ports 10/100/1000BaseTX acc. to PICMG 2.16 and VITA31.1, or Rear-I/O. Front ports: Two 1G SFP, four 1/2.5/5/10G SFP+, two 40G QSFP+, option for 4x 1G/10G each. Extended temperature range -40 °C to +85 °C.

CP6940-RA-OC
Rugged GbE Switch. Full L2/L3 management. Rear: 24 ports 10/100/1000BaseTX acc. to PICMG 2.16 and VITA31.1, or Rear-I/O. Front ports: Two 1G SFP, four 1/2.5/5/10G SFP+, four 1GbE RJ45. Extended temperature range -40 °C to +85 °C

CP6940-SA-OC-V
Value Line GbE Switch. Layer 2 management. Rear: 24x ports 10/100/1000BaseTX acc. to PICMG 2.16 and VITA31.1, or Rear-I/O. Front ports: four 1G RJ45, six 1G SFP. Standard temperature range 0 °C to +60 °C.
AccessoriesN/A
Recab UK
Interested in this Product?

Get In Touch