KONTRON VX3920

BACKPLANE: 24 10G BASEKR, 1 SGMII. FRONT PANEL: 2 SFP+, 2 RJ45, 1RJ11 (SERIAL)

Manufacturer: Kontron
KONTRON VX3920
Introduction

VX3920 provides 24 10 Gigabit Ethernet ports and comprehensive management features for extremely rugged 3U system designs. It implements Kontron Embedded Network Technology (same advanced feature set and operational interfaces across multiple form factors) which simplifies IPv4/v6 inter-and intra-platform networking.

Offering a switching capacity of 320Gb/s the non-blocking fully managed L2/L3 Gigabit Switch provides 24 x 10 G BaseKR ports to the backplane. Two 10 Gigabit ports are also available on the front panel through SFP+ ports, two RJ45 GETH and one RJ11 serial line ports. One GETH and the serial line port can be used for out-of-band management.

VX3920 is currently available in an air-cooled version (0°C to +55°C) and soon in rugged conduction-cooled version (-40°C to + 85°C).

MAIN SPECIFICATION

FunctionSwitching Functions:
• Static link aggregation (IEEE 802.3ad) on any port combination
• Classic, rapid and multiple spanning tree support (802.1D, 802.1w, 802.1S)
• Full duplex operation and flow control on all ports (IEEE 802.3x)
• Static MAC filtering, port authentication (IEEE 802.1X)
• Layer 2 multicast services using GARP/GMRP (IEEE 802.1p)
• VLAN support including VLAN tagging (IEEE 802.3ac), dynamic VLAN registration with GARP/GVRP (IEEE 802.1Q) and protocol based VLANs (IEEE 802.1v)
• Double VLAN tagging, port mirroring, IGMP snooping, ICMP

Multicast (Optional): RFC 2236—IGMPv2 , RFC 3376—IGMPv3, RFC 2710—MLDv1 , RFC 3810—MLDv2, RFC 3973—PIM-DM, RFC 4601—PIM-SM
Quality of Service: DiffServ, ACLs, CoS (Quality of Service)
Routing Protocols: (Optional) Include OSPFv2, RIPv2, VRRP, ARP
Switch Management: Fully managed L2/L3 switch via SNMP, TELNET, CLI Out of Band (front panel FE) or In-band via Fabric
Management Port: Management Port 10/100/1000BASE-T on front panel
Health Management: Status LEDs on front panel - Serial port front panel or backplane (user configuration), 2x I2C busses on P0, both with
master/slave capability (VPX SMB)
Interface(s)Up to 24x 10 GETH backplane ports, or 6x 40 GETH ports.
Port ordering option:
• x22 10GBASE-KR ports on rear, x1 10/100/1000BASE-T port rear + front, x2 SFP+ on front
• x24 10GBASE-KR ports on rear, x1 10/100/1000BASE-T front, no SFP+ on front.
10GBASE-KR ports can operate in SFI/SFP+ mode
10GBASE-KR ports can be associated by 4 to operate in 40GBASE-KR4 or 40G QSFP+ mode
One 10/100/1000BASE-T out-of-band management port on the front panel (RJ-45)
1 RJ-12 serial link

GENERAL

ExpansionOpen VPX MOD3-SWH-2F24U module usable in SLT3-SWH-2F24U-14.4.3 slots
Electrical50 Watts power consumption
Conformal CoatingSA - Standard Commercial: Conformal coating on request
RC - Rugged Conduction-Cooled: Conformal coating as standard
TemperatureSA - Standard Commercial:
• Operation: 0 to +55°C
• Storage: -45 to +85°C
• 26 cfm airflow required, convection cooled
• VITA 47-Class AC1

RC - Rugged Conduction-Cooled:
• Operation: -40 to +71°C/+85°C option
• Storage: -45 to +100°C
• No airflow required, conduction cooled
• VITA 47-Class CCE3, CC4 option
HumiditySA - Standard Commercial: 90% without condensation
RC - Rugged Conduction-Cooled: 95% without condensation
Altitude-1,500 to 60,000 ft (all versions)
VibrationSA - Standard Commercial: 20-500 Hz - 2g
RC - Rugged Conduction-Cooled: 20-2,000 Hz - 5g
ShockSA - Standard Commercial: 20g/11 ms Half Sine
RC - Rugged Conduction-Cooled: 40g/11 ms Half Sine
Warranty2 Years
RoHSCompliant
Recab UK
Interested in this Product?

Get In Touch