MEN G102

Up to 25 Gigabit Ethernet ports, -40 to +85°C, EN50155

Manufacturer: duagon MEN
MEN G102
Introduction

The G102 is a fully managed 3U flexible multiport Gigabit Switch, with a 29 GBit/s Switch matrix, implemented as a CompactPCI Serial board. It occupies one system slot or one peripheral slot using a 4 HP front panel with two Gigabit Ethernet ports on RJ45 connectors and one 2.5 Gb SFP cage. Alternatively, the G102 can be supplied with three M12 X-coded connectors on the front panel (for A-coded connectors, see the G101). The new backplane concept for MEN routers and switches allows high flexibility in network applications and management.

HIGH SPEED, HIGH EFFICIENCY AND EXTENSIVE PROTOCOLS

The G102 guarantees high speed, high efficiency and an extensive firmware supporting various protocols like security, time synchronicity, stability, as well as for temperature needs. The switch supports EEE (Energy Efficient Ethernet) as a standard on all ports, IEEE1588v2 on ports 1 to 12 and SyncE (synchronous Ethernet) as an option.

VARIOUS CONNECTION POSSIBILITIES DUE TO VARIOUS PORT OPTIONS

The G102 either features three Ethernet ports on the front and up to 22 ports on the rear, or alternatively all 25 ports on the rear. These include 12 ports with integrated 10/100/1000 Mbit/s copper PHYs. In addition, the G102 features a high-performance port with up to 2.5 Gbit/s for an SFP pluggable module to support a high-speed uplink.

INCREASED RELIABILITY THROUGH BUILT-IN TEST MECHANISMS

The switch is fault-tolerant and restores itself on its own: If a link is temporarily unavailable, frames can be sent via backup/redundant links (spanning tree protocol/link aggregation) and no data loss occurs. Its built-in test mechanisms make the G102 an even more reliable component in the communication system.

RUGGED AND COMPLIANT TO RAILWAY STANDARDS

The railway Ethernet switch is specifically designed for rugged mobile communication systems and fully compliant with the EN 50155 railway standard, qualified for a -40 to +85°C operation temperature and ready for coating.

MAIN SPECIFICATION

FunctionSwitching Matrix
•  Total switching capacity of chipset: 29 Gbit/s
•  MAC address table size: 8192
•  Switching algorithm: Store-and-forward, TCAM high-speed (Ternary Content-Addressable Memory)
General Network Support
•  IPv4
•  IPv6
•  IPv6 Ready Logo approved
Protocols and Functionality
•  DHCP Option 82
•  DHCP Server/Client
•  DNS Client (RFC 2136)
• DNS Proxy (RFC 5625)
Ports and Port Control
•  Energy Efficient Ethernet (IEEE 802.3az)
•  ETH Signal Equalization and Power Control
•  Port state (admin), speed, duplex mode and flow control
•  Port frame size (Jumbo Frames: 9216 bytes/packet max.)
•  Port status (link monitoring) and statistics (MIB counters)
•  Port VeriPHY (cable diagnostics), ActiPHY and PerfectReach
•  Inband management (VRAP)
User Configuration Interfaces
•  Command-line interface (CLI) via console, SSHv2, Telnet
•  Web interface (HTTP/HTTPS) via IPv4, IPv6
Interface(s)Ethernet
• 3x 1000BASE-T, M12, X-coded, receptacle
• 24x 1000BASE-T, backplane
• 24 backplane ports is the maximum configuration possible in combination with line cards.
Serial
• 1x RS232, M12, A-coded, receptacle
Serial GPIO (SGPIO)
• One channel, compliant with SFF 8485 specification
LED
• Status: board status
• Ethernet: link, activity
Dongle interface
Connection(s)The following configurations are available:
• 3x 1000BASE-T, M12, X-coded, receptacle
• 24x 1000BASE-T, backplane
• 24 backplane ports is the maximum configuration possible in combination with line cards

GENERAL

ExpansionCompactPCI® Specification PICMG CPCI-S.0
• System or peripheral slot
• Based on CompactPCI Specification PICMG CPCI-S.0 with MEN switch extensions
ElectricalSupply voltages
• +12 V (9.5 V to 15.5 V)
Power consumption
• Max. 16 W
MechanicalDimensions: conforming to CompactPCI® specification for 3U boards, 4 HP
Conformal CoatingConformal coating on request
SoftwareFirmware for configuration and management
TemperatureTemperature range (operation):
• -40°C to +85°C
• Airflow 1.5m/s
Temperature range (storage): -40..+85°C
HumidityRelative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Weight200 g
VibrationVibration (Function): 1 m/s², 5 Hz to 150 Hz (EN 61373)
Vibration (Lifetime): 7.9 m/s², 5 Hz to 150 Hz (EN 61373)
Shock50 m/s², 30 ms
MTBF692.753 h @ 40°C according to IEC/TR 62380 (RDF2000)
Safety/CertificationFlammability
• UL 94V-0

Electrical Safety
• EN 50155 (Insulation)
• EN 50155 (Voltage)
EMCEN 55022 (radio disturbance)
EN 61000-4-2 (ESD Immunity)
EN 61000-4-4 (burst)
Warranty2 Years
RoHSCompliant

 

ORDERING DETAILS

Board02G102-02
12x 1 Gbit/s + 1x 2.5 Gbit/s (2x 1 Gbit/s + 1x 2.5 Gbit/s on front) with "on-the-Fly" SFP detection support

02G102-03
12x 1 Gbit/s CU Ports (3x 1 Gbit/s X-Coded M12 on front)
AccessoriesN/A
Recab UK
Interested in this Product?

Get In Touch