Recab UK

Kontron XMC-ETH2/PMC-ETH2 - Dual Gigabit Ethernet PMC or XMC with RJ45

KONTRON XMC-ETH2/PMC-ETH2

DESIGNED FOR EMBEDDED APPLICATIONS

Manufacturer: Kontron

Introduction

XMC-ETH2/PMC-ETH2 Ethernet Mezzanine is designed to fit any VME, VPX or CompactPCI Single-Board Computer in the market.

XMC-ETH2/PMC-ETH2 provides two-gigabit copper links selectable in front or rear. When power on the P5 connector is detected, the bus interface is selected to be a PCI Express interface with four lines. Otherwise, it switches to PCI 33 MHz or 66MHz, 32 bit on PMC connectors. The PMC PCI interface is compatible with 5V and 3.3V V(I/O) voltages. Rugged conduction-cooled builds feature a PMC version with PCI connection and an XMC version with PCI Express.

Key Features

Dual Gigabit Ethernet PMC/XMC with RJ-45
Two 10/100/1000 BaseT Gigabit Ethernet ports
Two standard RJ-45 interfaces
Intel® 82571 Gigabit Ethernet controller
XMC PCI Express™ Gen 2.0 x8 interface or
PMC PCI 32 bit/33MHz or 66MHz on P1/P2
0 to 55°C, -40 to 70°C or -40 to 85°C operation

Download Kontron XMC-ETH2/PMC-ETH2 Datasheet
Download Kontron XMC-ETH2/PMC-ETH2 Manual

ETHERNET/WLAN
Interface(s)	Two Gbit RJ-45 sockets
Controller(s)	Dual Channel (Intel® 82571) Gigabit Ethernet Controller
Connection(s)	Two 10/100/1000 Base-T Ethernet links either configurable on front RJ45 (with LED signalling) or to the rear P4

GENERAL
Expansion	Automatic or manual selection between PCI 32 bit/33MHZ (up to PCI 32 bit/66MHz) on P1/P2 and PCIe® link with 4 lanes on P5 Alternatively, there are two build options for rugged versions: - PMC with PCI connection from PCI 32 bit/33MHz or 66MHz on P1/P2 - XMC with connection speed from one PCIe® link with 4 lanes on P5
Electrical	Power Supply: 3.3 V Maximal Power Requirement: 5 Watts When operated through the XMC PCI-E interface, the VPWR XMC power (+5V or +12V) should be present so that PCI-E interface detection is done
Mechanical	74 mm x 149 mm x 8.2 mm Form factor: • IEEE P1386 - Standard Air • VITA 20 - Conduction Cooled
Conformal Coating	Conformal coating on request
Software	Linux, Windows, VxWorks Other Drivers on request
Temperature	SA - Standard Commercial: • Operation: 0 to +55°C • Storage: -45 to +85°C • 1.5 m/s airflow required, convection cooled • VITA 47-Class AC1 RA - Rugged Air-Cooled: • Operation: -40 to +71°C • Storage: -45 to +100°C • 1.6 m/s airflow required, convection cooled • VITA 47-Class AC3 RC - Rugged Conduction-Cooled: • Operation: -40 to +85°C option • Storage: -45 to +100°C • No airflow required, conduction cooled • VITA 47-Class CC4 option
Humidity	SA - Standard Commercial: 95% without condensation RA - Rugged Air-Cooled: 95% without condensation RC - Rugged Conduction-Cooled: 95% without condensation
Weight	90 g with heatsink (SA and RC build)
Altitude	SA: -1,640 to 15,000 ft RA: -1,660 to 33,000 ft RC: -1,640 to 50,000 ft
Vibration	SA - Standard Commercial: 20-500 Hz - 2g RA - Rugged Air-Cooled: 20-2,000 Hz - 3g RC - Rugged Conduction-Cooled: 20-2,000 Hz - 5g
Shock	SA - Standard Commercial: 20g/11 ms Half Sine RA - Rugged Air-Cooled: 40g/20 ms Half Sine RC - Rugged Conduction-Cooled: 40g/20 ms Half Sine
MTBF	XMC-ETH2-RC-000: 498 092 h Ground Benign 25° PMC-ETH2-RC-000: 484 700 h Ground Benign 25° Refer to manual for other models/temperatures
EMC	EMC qualifications EN55082 (Ed. 09/95) EN55022 (Ed. 22/94) class A
Warranty	2 Years
RoHS	Compliant

ORDERING DETAILS
Board	XMC-ETH2-SA-000 XMC-ETH2 Air-Cooled Commercial Build, front and rear Ethernet ports, PCI PMC and PCIe XMC interface XMC-ETH2-SA-000V XMC-ETH2 Air-Cooled Commercial Build, front and rear Ethernet ports, PCI PMC and PCIe XMC interface, conformal coating PMC-ETH2-SA-000 PMC-ETH2 Air-Cooled Commercial Build, front and rear Ethernet ports, PCI PMC only interface, no P5 XMC connector PMC-ETH2-RA-000 PMC-ETH2 Rugged Air-Cooled Build, front and rear Ethernet ports, PCI PMC only interface, no P5 XMC connector PMC-ETH2-RC-000 PMC-ETH2 Rugged Conduction-Cooled Build, rear Ethernet ports only, PMC configuration, no P5 XMC connector XMC-ETH2-RC-000 XMC-ETH2 Rugged Conduction-Cooled Build, rear Ethernet ports only, XMC configuration, no P1/P2 PMC connector
Accessories	N/A

KONTRON XMC-ETH2/PMC-ETH2

DESIGNED FOR EMBEDDED APPLICATIONS

Introduction

Key Features

ETHERNET/WLAN

GENERAL

ORDERING DETAILS

Interested in this Product?

Ordering

Support

Contact Us