MEN P512


Manufacturer: duagon MEN
MEN P512

The P512 offers Reflective Memory functionality, for example for redundant computer structures in safety-critical applications. Reflective memory is a memory bus technology from Encore Computer that allows simultaneous reads and writes to multiple memories. It can be used to share memory among multiple CPUs. The advantage of reflective memory is the possibility to set up deterministic real-time communication networks across computer systems and operating systems.

Each P512 module offers one LVDS channel. The modules can be interconnected in a fully connected mesh and support multi-mode up to two meters. Each computer in a system needs one PMC for each connection to another computer (2 computers: 1 PMC each, 3 computers: 2 PMCs each etc).

The module is equipped with 32 MB DDR2 DRAM.

The P512 is a PMC mezzanine card suitable for any PMC compliant host carrier board in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC in telecommunication, industrial, medical, transportation or aerospace applications. It supports 32 bits/33 MHz. Appropriate PMC carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers.


Model Info1 LVDS channel
Usable in fully connected mesh
Multi-mode up to 2 meters

32MB SDRAM memory
• Soldered
• DDR2
• 132MHz memory bus frequency
• FPGA-controlled

2MB non-volatile Flash
• For FPGA data
• FPGA-controlled
ConnectorShielded 50-pin HP D-Sub SCSI 2 receptacle connector (via front panel)
PerformanceConnection speed 230 MHz
• PCI to LVDS TX write performance (burst): 28.52 MB/s
• PCI to LVDS TX write performance (longword single): 15.89 MB/s
• DMA from PCI to LVDS TX performance (burst): 20.81 MB/s

Access to LVDS RX/TX memory
• PCI to RX/TX memory write performance (burst): 107.43 MB/s
• PCI to RX/TX memory read performance (burst): 99.16 MB/s
• PCI to RX/TX memory write performance (longword): 15.89 MB/s
• PCI to RX/TX memory read performance (longword): 5.37 MB/s
Data SecurityNot supported


ExpansionCompliant with PCI Specification 2.2
32-bit/33-MHz, 3.3V V(I/O)
ElectricalSupply voltage/power consumption:
• +5V (-3%/+5%), 109mA
• +3.3V (-5%/+5%), 143mA
MechanicalDimensions: conforming to IEEE 1386.1
Conformal CoatingConformal coating on request
SoftwareMDIS driver
TemperatureTemperature range (operation):
• -40..+85°C (qualified components)
• Airflow: min. 1.0m/s
Temperature range (storage): -40..+85°C
HumidityRelative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
WeightWeight: 78g
Altitude-300m to + 3,000m
Vibration(sinusoidal): 1g/10..150Hz
ShockShock: 15g/11ms
Bump: 10g/16ms
MTBF1 434 674 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety/CertificationPCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMCConforming to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Warranty2 Years



1 channel (TX/RX) reflective memory usable with 2nd P512 and special crossed cable, -40..+85°C with qualified components
25 mounting screw sets to fix PMC/XMC modules on carrier boards

Crossed cable (TX/RX) for connection of two P512 reflective memory PMCs , -40..+85°C
Recab UK
Interested in this Product?

Get In Touch