TRI-M ULTRAUPS

5V OUTPUT, BUILT-IN 750MA-HR 8.4V NIMH BATTERY, -40 TO +85 OPERATION

Manufacturer: Tri-M Technologies
TRI-M ULTRAUPS
Introduction

The ultraUPS are a series of backup power solutions for rugged and hostile environments where down time for servicing and power outages is unacceptable or uneconomical. All the ultraUPS units operate down to -40oC and the ultra capacitor units up to 85oC. The Li-Ion ultraUPS units have an operating temperature range of -40C to 70C and backup energy of 2.2 megajoules (617 watt-hours). That's enough energy to keep Tri-M's VDX104 running for over two weeks! The ultra capacitor units have an operating temperature range of -40C to 85C with backup energy up to 15 kilojoules (4.2 watt-hours). The 6 amp output of the ultraUPS units can be field adjusted programmed between 5V and 16V. The main input of the ultraUPS protects against vehicle “load dumps” and transients and is designed to MIL-STD-1275 requirements. The ultraUPS units also support power direct from 15V or 30V solar panels.

POWER SUPPLY

Input6 to 40VDC
Output(s)6 amp output of the ultraUPS units can be field adjusted between 5V and 16V
BatteryUp to UPS of 2.2 megajoules (617 watt-hours) Li-Ion backup
CapacitorsUp to UPS of 15 kilojoules (4.2 watt-hours) ultra capacitor backup
OtherRS232 communication port for monitoring and control.
Power good signal, remote on/off control line and a 5V standby power.
Supports 15V and 30V solar panels for main power supply.
Three LEDs provide status of input power, backup energy and the output.
Load dump and transient protected.

GENERAL

TemperatureTemperature range (operation): -40°C to +85°C (ultra capacitor units)
Temperature range (operation): -40°C to +70°C (Li-Ion units)
Warranty1 Year
RoHSCompliant

 

ORDERING DETAILS

BoardUPS-52M2[-x]-PBF
UPS of 2.2 megajoules (617 watt-hours) Li-Ion backup

capUPS-415K[-x]-PBF
UPS of 15 kilojoules (4.2 watt-hours) ultra capacitor backup

capUPS-47K5[-x]-PBF
UPS of 7.5 kilojoules (2.1 watt-hours) ultra capacitor backup

UPS-52M2[-x]-VDX/strong>
Includes a VDX104-1E. An isolated RS-232 and Ethernet port provides remote access. The VDX104-1E is supplied with Linux ready for the customers application.

UPS-52M2[-x]-HECS
Includes the HECS datalogging stack of a VDX104-1E and TCB1522. Four isolated RS-232, one isolated RS485, dual CANbus and one Ethernet port are provided.

Where [-x] is the factory set output voltage.

Example: UPS-52M2-12-PBF; Output voltage factory set to 12V.
AccessoriesN/A
Recab UK
Interested in this Product?

Get In Touch