Manufacturer: JADAK

This module is designed to meet the demands of high-performance RFID handheld, mobile, and stationary readers. The Micro (M6e-Micro) offers two antenna ports and supports the ability to transmit up to +30 dBm for demanding applications. The edge connections for signals, power, and RF allow the module to be soldered directly to a motherboard as a standard component. The onboard connectors allow the module to be mated to a motherboard as an add-on option.


The Mercury DevKit for ThingMagic UHF RFID modules contains all the components necessary to begin reading and writing RFID tags and developing RFID-enabled applications. A powerful application programming interface (MercuryAPI) provides code examples, a graphical read-write demo program, and delivers a consistent programmatic interface for development with all ThingMagic fixed and embedded reader products

Development Kits are module specific. Individual DevKits must be purchased for each ThingMagic module type. A single module is included with each DevKit purchase.


RFID Protocol SupportEPCglobal Gen 2 (ISO 18000-6C) with max backscatter rate of 640 kbps
IP-X and ISO 18000-6B optional
User-accessible Flash Memory16 kB
Tag BufferMinimum 200 tags with 96-bit EPC
Max Tag Read RateMore than 750 tags/second using high-performance settings
Antenna ConnectorTwo 50 ? connections (board-edge or U.FL)
RF Power OutputSeparate read and write levels, command adjustable from -5 dBm to 30 dBm* in 0.5 dB steps, accurate to +/- 1 dBm (May be temperature dependent limits on duty cycle above +23 dBm)
Regulatory/FrequencyPre-configured for the following regions:
FCC (NA, SA) 902-928 MHz
ETSI (EU, India) 865.6-867.6 MHz
TRAI 865-867 MHz (India)
KCC (Korea) 917-920.8 MHz
ACMA (Australia) 920-926 MHz
SRRC-MII (P.R.China) 920-925 MHz
'Open' (Customizable channel plan; 865-868 MHz and 902-928 MHz)
Connector28 board-edge connections or Molex low profile connector (53748-0208) providing access to DC power, communication, and GPIO signals
SignallingUART; 3.3V logic levels (5 V input tolerant); 9.6 to 921.6 kbps
USB 2.0 interface (12 Mbps)
Reset and Shutdown controls
GPIO Sensors and IndicatorsTwo 3.3V bidirectional ports configurable as input (sensor) ports or output (indicator) ports
API Support.NET, Java, and Embedded "C" APIs


ElectricalDC Voltage: 3.5 to 5.25 V (Will operate below +3.5 V with reduced input line noise immunity)
DC power consumption @ RF level:
• 5.5 W @ +30 dBm
• 3.5 W @ +27 dBm
• 2.5 W @ +23 dBm
• 2.0 W @ 0 dBm

Idle DC power consumption:
• 0.33 W in ready mode
• 0.06 W in power-save mode
• 0.01 in sleep mode
• 0.00025 in shutdown mode
Mechanical46 mm L x 26 mm W x 4.0 mm H (1.6 in L x 1.0 in W x 0.16 in H)
SoftwareRefer to the ThingMagic Mercury API page for further information
TemperatureTemperature range (operation): -20C to +60C
Temperature range (storage): -40C to +85C
VibrationSurvives 1 meter drop during handling
ShockSurvives 1 meter drop during handling
Safety/CertificationFCC 47 CFR Ch. 1 Part 15
Industrie Canada RSS-21 0
ETSI EN 302 208 v1.4.1
Warranty1 Year
Recab UK
Interested in this Product?

Get In Touch