ThingMagic USB Pro RFID Reader

DRIVEN BY THINGMAGIC'S POWERFUL MERCURY 5E-COMPACT UHF RFID READER MODULE

Manufacturer: JADAK
ThingMagic USB Pro RFID Reader
Introduction

ThingMagic’s USBPro with Desktop RAIN® RFID Reader,  based on the M6e-Micro LTE RFID module, offers a number of enhancements including:

  • Wider power range
  • New external antenna port
  • Enhanced firmware features

The USBPro reader is preconfigured for most regions in the world including the Americas (FCC / IC rules), Europe (ETSI rules), India (TRAI), Korea (KCC), Australia (ACMA), China (SRRC-MII), and Japan (MIC).  The reader also has a customizable option to accommodate other areas and research applications.

The wider power range gives greater flexibility in applying the reader.  With internal and external antenna options, the power setting may now be varied to match a wider range of applications. The enhanced firmware associated with the M6e-Micro LTE module includes support for ISO 18000 6C Gen2V2 tags, faster initialization on startup, and additional protocol support (may require additional licensing).

  • Support for EPCglobal Gen 2 (ISO 18000-6C) with Anti-Collision and DRM
  • Powered by USB connection to a notebook or desktop PC
  • ThingMagic Reader Assistant software and applications development tools
  • Support for full 860 to 960 MHz UHF RFID carrier frequency range to accommodate worldwide regulations
  • Certifiable for operation in countries adopting FCC, ETSI, KCC, TRAI, ACMA, SRRC regulatory specifications (Open (Customizable) 860-960 MHz)
  • Tag Read Rate up to 50 tags/second
  • Tag Read Distance Up to 1.2 m (4 feet) with internal antennaTag read distance up to 6.1 m (20 feet) with external 6 dBi linear polarized external antenna
  • High impact plastic case
  • Dimensions: 97 mm L x 61 mm W x 25 mm H (3.8 in L x 2.4 in W x 1.0 in H)

RFID SPECIFICATIONS

RFID Protocol SupportEPC Gen2V2 ISO18000-63 standard
ISO18000-6B, IPx, AEI ATA are available through additional license
Command-response protocol protected by length field and 16-bit CRC
User-accessible Flash Memory16 kB
Tag Buffer200 tags
Max Tag Read Rate50 tags/second
Max Tag Read DistanceUp to 4 feet (1.2m) depending on tag sensitivity and orientation with internal antenna.
Up to 20 feet (6.1m) with external 6dBi linearly polarized wideband antenna.
Antenna ConnectorInternal antenna with an average gain of +1 dBi from 865-869MHz and 902-928MHz
External RP-SMA antenna connector
RF Power OutputSeparate read and write levels (into the antenna) are command-adjustable from -5 dBm to 30 dBm (1W), +/- 1.0 dBm accuracy with +20dBm default
Regulatory/FrequencyPre-configured for the following regions:
• FCC 902-928,917.4-927,917.5-922.5 MHz (Americas)
• ETSI 865.6-867.6 MHz, 869.85 MHz (EU)
• TRAI 865-867 MHz (India)
• KCC 917-920.8 MHz (Korea)
• ACMA 920-926 MHz (Australia)
• SRRC-MII 920-925 MHz (P. R. China)
• MIC 916.7-920.9 MHz (Japan)
• Open (Customizable) 865-869 and 902-928 MHz
ConnectorUSB Micro-B connector, with removable six (6) foot cable with dual USB-A type plug, USB 2.0 interface
GPIO Sensors and IndicatorsTwo I/O command controlled LEDs and two I/O command queried switches

GENERAL

ElectricalDC Voltage: 4.5 to 5.5 VDC from USB cable DC
Power:
• 6.2 W max
• 0.35 W max at idle (Power management modes can be used to reduce this to as little as 0.1 W)
Supplied interface cable terminates in two type-A plugs: one for power and signal, the second for additional power if needed
Mechanical97 mm L x 61 mm W x 25 mm H (3.8 in L x 2.4 in W x 1.0 in H)
(does not include stand)
SoftwareRefer to the ThingMagic Mercury API page for further information
TemperatureTemperature range (operation): -30C to +60°C
Temperature range (storage): -40 to +85°C
Safety/CertificationFCC 47 CFR Ch. 1 Part 15,
Industrie Canada RSS-21 0,
ETSI EN 302 208 V1.4.1
IEC 60950-1 (ed.2)
US-17650-UL
Warranty1 Year
RoHSCompliant

 

Ordering Details

BoardUSB-6EP UHF RAIN RFID Desktop Reader

Includes USB cable
AccessoriesUSB-6EP-DEVKIT UHF RAIN RFID Desktop Reader Development Kit

The USBPro Development Kit supplies the following components:
• USB-5RP reader and USB cable
• Selection of UHF RFID tags and tag inlays
• 30cm (1 foot) SMA cable with reverse SMA connector on one side and SMA connector on the other
• Linear antenna with 3 dB gain, supporting a frequency range of 860 to 960 MHz. (The antenna may be labelled 890 to 960 MHz based on its original intended application as an indoor cell phone repeater.)

 

Recab UK
Interested in this Product?

Get In Touch